Doug phillips
-
Posts
4,276 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Doug phillips
-
Finished, and I am very pleased with the results.
-
Ok, so i collected the seat from Oxted on Tuesday and I am very pleased total cost £75 + Vat And the back. I am now starting to use the leather refirb kit that I ordered, and hope to have them finished later on today.
-
That was quick, just had a call from Oxted trimming saying that my seat has been repaired. Off to collect it, in the morning.
-
Ok, ok everybody is a wise guy Just as well it said leather, and not Rubber
-
Right having driven around (for some time) with a broken drivers seat, I have decided to get it fixed and also at the same time referb the leather with a kit I have ordered. So yesterday I removed the drivers seat, only to find that it was worse that I thought (sorry but for some reason all the pictures are at the wrong angle) Looking down. And a bit of a hole, in the back. So first thing this morning I gave Oxted a ring and have dropped them off, they will replace the plastic and all of the foam. More info when I get hem back
-
Flipping website and IPad, I have the hump. And will go upstairs and do it on my PC
-
Ask Leebert, he has made a cushion and head rest so that his wife can drive the car.
-
Ian I was thinking of somthing like fitting it to the base of a plastic sandwich box, then just pressing the actual box part on the top / base.
-
Has anybody ever moved the fuze box to a better location, somthing radical like under to bonnet ?
-
I had the same problem, it will go on just "use the Force Luke" It will go on, oh and I also added some more grease to the joint at the same time.
-
Just about, I did this the other week. You will need to break the track rod end from the hub, then remove it (counting how many turns it takes to come off). Then cut the cable ties that hold the old gaitor on, and remove it. Replace and wind the track rod end back on the same amount of turns. Put it back into the hub, an tighten back up the nut.
-
Mine has four speakers fitted, one behind each seat, and another one eather side on the dash.
-
Quick question, how much did it cost ?
-
Just seen this, they made more than 9. I have seen No 16, and think that 18 were made in total. I have No 3, which was Caterham's demo car.
-
You can see the blue high beam light, just above the starter button on mine.
-
I dough-not need another TV Steve, or I would of taken it of your hands.
-
And so, it begins
-
Ultra sound is the way to go, when I was at Red Bull they were checking a front wing using it. It is the only way to look for fractures, I don't know of anybody who offer it as a service.
-
Lotus Seven Club Watch - available for purchase
Doug phillips replied to Alex Rae's topic in For Sale
I have one as well, if anybody wants it -
There is a blead nipple on the slave cylinder, which is a pig to get to. Just blead it like you would do the brakes, it is a two man job. Oh and did i say, it's a pig to get to
-
LJV Yhm
-
The folding tables have gone
-
You cannot get better than free 😬 Located in a office in Epsom, I need to get rid of the following 1 right hand corner desk 1 left hand corner desk 4 folding top office tables 2 desk dividers 1 tall grey cabinet with a mix of shelves and suspension files Oh, and a small coffee table. All are beech coloured and in good condition, must be collected. I can email pictures if required. Thanks
-
Bits and pices, from a office move tech stuff
Doug phillips replied to Doug phillips's topic in For Sale
The camera works just fine, and I will through in a box of (10) 3.5" disks FOC. 😬 -
Bits and pices, from a office move tech stuff
Doug phillips replied to Doug phillips's topic in For Sale
I have loads of disk, and will even through some in FOC 😬
