Doug phillips

Hi I am helping a charity move one of there offices, and I have uncovered some tech stuff that some of you may want. As the money will go back into the charity, I just want people to make an offer on the price So ................... Olympus DS-50 digital voice recorded comes with a case box and software for Windows Vista , it looks like it has only been used a few times and is in a like newcondition. Same as this Now Sold Dray trek Vigor2820 ADSL router, this is very good router for business use, in it's box with PSU and leads. This was used for about one year. Now the cream of the crop one for you retro camera owners, I have a Sony FD Mavica 2 Mega pixel camera that saves onto a 3.5" floppy disk 😬 here I am charging this, and will test it tonight. Thanks for looking Edited by - Doug Phillips on 21 Aug 2014 13:44:03

I just use a brio pad, and then polish with autosolve. I like a shiny hob 😬

When I replaced mine, I just took a picture if the wires in the connector block and removed them from the block. Then just pulled the wires through the tube, job done.

Oh go on, I will take the number plate light off your hands. Mine has only been broken for 12 years 😳, well it is cracked.

I had this happen about 4 years ago, about 15 minutes before a MOT 😳. I just filled up the reservoir and have never had a problem again, I never did find out why it happened but it is the only time it has given me a problem, in 12 years .

Edited by - doug phillips on 21 Jun 2014 15:16:29

Hold on a minute, is that a scratch I can see on the rear wing . I now hope that all of your troubles are behind you now, and you can get out and enjoy it .

If i do that, the water temp goes up by 10. I was told the it was a earth problem, but have never managed to sort it out

I thought the all of the offices were now closed, and all paperwork had to go to the sheep lovers .

I must drive like a wus ☹️, as in 12 years I have never had a leak .

I don't know the life span, but mine are 12 years old and have done 57k and are still ok.

Just done it, and for anybody else with the same problem I just found an old Gclamp that just fitted under the wheel arch 😬. It was just enough to move the tube into place, all I have to do now is the other side.

Two days, and still I cannot get it on I have the Caterham four pot brakes, and it just cannot get the bolt to bite, that holds the spring plate and tupe onto the brake pads. Does anybody have any tips ?? I have just replaced the wheel bearings and need to get this done for WightBlat, and I am about to lose my rag with it. Ta

Quoting Gary Stone: Motor factors. Thats where I got mine. Half the price of Halfrauds. This. Had to buy some for our tin top, NGK with the twin contacts £3 each .he did not have them in stock, but one cup of coffee and a chat and they arrived .

I did not have a seal on mine ☹️, so I used some mastic. Still get the condensation, on a long blat .

Hi Mike, it is easy to do this yourself as I did mime a couple of years ago. Take the stack out of the car and remove the back, then if I remember you have to lift off the circuit board. You will then see the battery, I cannot for the life of me remember what type it was, but I did have one in the house. No need to send it back to Stack.

Quoting old gimmer: Quoting gileshudson: £699 fitted. http://www.essatigaragedoors.co.uk/offers.php Essati seem to be the same company as Seguro who supplied the doors for the bulk buy, has anybody got feed back regarding quality/ installation,as I'm still interested in purchasing a single door, Thanks, John. Yep, had mine fitted to my new garage just before Christmas and I am very pleased with it. The fitters did a very good job, and it only took them about 2 hours to fit it. My builder and the window fitter think that is a very good door, so they are happy and so am I . I just which that it played the theme of Thunderbirds, when it opens 😬

Hmmmm ........ You may get some strange look's if out with the wife . Just what would people say, if you were to say "darling, could you grab my Hampton, and stick it on my head"

😬

Tom watch this space, I may have a second copy soon . This could affect the price

I have for sale, a copy of this fine email for the most secret event that the club has ever held (unless you live in EastKent), so it is first come first served. I hold the right to photocopy this email, and offer it for sale on other sites 😬 Come on, and give me your money 😬 😬

My new garrage will have central heating installed 😬, the roof should be finished by the end of the week . I am one happy camper

Having a dig around the net, it look like it may be a ford part. There is talk of using the Caterham part, on a cortina .