Garth

Thanks Jonathan I have not used it for a few years so cannot remember the finer details of what it was doing exactly! Am going to take the car out with a friend and try it to remind myself of how it was behaving. Can tell you I started off with a Baofeng UV-5R, then tried a Wouxun KG-639E and then a Kenwood TK-3501. Still have them all so will try them all again! Will report!

👍

Have never been able to use a walkie talkie successfully in my car - Sigma with Emerald ECU - when stationary they work fine but as soon as I am on the move everything goes pear shaped with intermittent reception and no transmission! Can anyone recommend an Auto Electrician who I could talk to about trying to sort out the issue? Anyone had similar issues? Thanks Garth

Not come across them but I have a Titan LSD for a ford diff which has been rebuilt by Road and Race so like new. could let you know what the ramp angles etc are if you are interested and decide to go for a Titan! Good luck

Why nit replace the plastic screw with something more substantial - probably something with a bit of steel in it? Mine have worked fine for 12 years - Think mine is fixed with a popper?

I will have it thanks - will send PM with address... Garth

Hi Kimble Am interested - not too far from you - could I pop over and have a look - have sent you private mail with my telephone number! Cheers Garth

I am hoping to try and get decent communication between a couple of cars on our upcoming trip to Sardinia. I have always tried using a cheap Baofeng unit but not been good! Cannot find anything on BlatChat, but recall people speaking highly of a Kenwood unit? Any suggestions welcome please and then also on how to get it 'programmed' to the frequency the club use? Thanks Garth

I asked for a set on facebook - just making sure my order is registered!! Garth

I would do it yourself. On your drive to the testing center use the brakes as much as possible - mine failed first time round due to 'uneven' braking. There was nothing wrong with them - just needed to be 'bedded' in a little?

Hi Ivaan - could I have the charger please.... Thanks Garth

I use an old BJ A-Max for my SV - very snug fit - I have lips on the edge of the trailer, so has to fit within! BJ make different size trailers, so you will need to look at the bed size of the particular trailer. If it is a flat bed and the wheels overhang by a couple of mm you should be ok (he says tentatively!) Have not got the exact dimensions of my trailer to hand. Good luck!

I will have the diff please

Have sent you private mail Colin

Personally I just think the wider tyres on the back look more purposeful so that did it for me! Good choice me thinks!!