Richard K
-
Posts
538 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Richard K
-
I have a 1700 X/flow with 234 cam but had set my tappet clearance according to a standard 'Haynes' manual for a 1600cc. Having checked the Kent Cams web site they specify. Inlet 0.56mm (0.22") Ex. 0.61mm (0.24") Can someone confirm these are 'engine cold' settings. Thanks Richard
-
I got it years ago from someone, but I never had it fitted on my car. I guess all the packing went along time ago. Glad you could make use of it Richard
-
Ammo, Blatmail sent Richard
-
Quick question on Crossflow Oil Pressure
Richard K replied to hendrixswhitestrat's topic in TechTalk
As Baz said - It's normal once the oil gets hot. Richard -
Jonathan, There is no detergent. The instructions say to use the cleaner then rinse off with cool low-pressure water? Richard
-
Just about too use mine Richard
-
Air Filter Cleaner - Sodium metasilicate pentahydrate (CAS No. 6634-92-0) Air Filter Oil - Distilates (petroleum), hydro treated heavy paraffinic (CAS No. 64742-54-7), 1-Decene, homopolymer, hydrogenated (CAS No. 68037-01-4), C.I. Solvent Red 164 (CAS No. 71819-51-7) So it's not "Snake Oil" Richard
-
Russ. I have a K&N kit I post up the ingredients on the bottle tomorrow. Richard
-
OK - I'll try and take some pictures over the next few days. Richard
-
Richard, I have what started life as the 'standard' rear exit exhaust for a x/flow. This was adapted to have a side exit tail pipe. I never got round to fitting it and now have a differnt silener to fit on my car. Yours for free to cut about but I am in Essex But I will be going to the Silverstone Classic Saturday in the Tin Top. Let me know if this is of any use Richard
-
Have a look at the 'Clear' screen from meteor. It's great if you are short 🙆🏻 like me. Richard 😬
-
Just a test
-
Hi Russ - Yes remember it well. If you are going to Stoneleigh and camping, i'll bring a bottle. How did you get on fitting the BB half doors. Got mine on with a bit of cutting and slight bending. Richard
-
The 'fireblade' did belong to Stuart "7 Nut". I have the same screen on my car, that I picked up second hand about 8 years ago. They were a batch made by a club member I think. If I needed a replacement I would chose the one the Capt Sensible pointed to. The great advantage is that you have clear vision down the bonnet. Richard
-
Try using the switch several times. This cleans the contact points Richard
-
Hi Paul, Have replied to your email. Richard
-
Got mine today Thanks Gary Richard
-
We have a match Also lable has W=1.100 Richard
-
Hi - Interested as mime no longer records the miles !!! Is this the same as 1989 vintage? Richard
-
The link from the 'Bulk Buy' was not working but this should work here Richard
-
purchasing injection tank or modifying existing one?
Richard K replied to John Gaines's topic in TechTalk
John, Mic has just posted one in the 'for sale'. You could then off set the cost by selling yours. Just a thought 😬 Richard -
Hi Gary 3.0m x 60cm please Blast mail sent Richard
-
I think they act as a 'dust cover' to ensure the surface of the reflctor stays shinny. Richard
-
Hi Tim, Could you post a link to show us the set and what size range? NB where in Essex approx. are you. Thanks Richard
-
Battery Charger on sale at Lidl from 17 January. £13.99 Will this operate as a battery conditioner ? Richard Edited by - Richard K on 11 Jan 2013 13:11:43 Edited by - Richard K on 11 Jan 2013 13:13:03
