Boris
-
Posts
1,438 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Boris
-
Linky no worky -
If it's criticle I can lend you one and you can replace it later (I always carry a spare in the boot)
-
Assuming he has a heater, disconnect top matrix hose and fill expansion tank till water pours from matrix and top hose, replace top hose. if needed top up expansion tank. run engine, if it boils up again refer to Mark W's post
-
Burton power http://www.burtonpower.com/parts-by-fitment-type/parts-by-engine-ford/ford-cross-flow-kent.html?brand=54&product_area=600
-
I'm aware that I will have to remove the filter from under the car but I previously used 2 oil catch pans, 1 for the sump and 1 for the Apollo due to a fire I will need to replace both catch pans and no longer have so much space, also not in such an easy place for disposing of old oil now, so thought this could be an option as I can get it for only a few £'s more than two catch pans.
-
Will one of these work on a K series with an Apollo tank?
-
Enjoy the Daytona, I've looked at one twice and it's very tempting, but I've already got too many watches (say's SWMBO) and I'm not prepeared to part with any of them.
-
I have a stripe on mine and have experienced no leaks
-
Ford Kent Crossflow 1720cc - new engine 140hp
Boris replied to Midlifecrisis2001's topic in For Sale
I would have though if you hd an old x-flow that swoping it out for a Zetec would be a good option, http://www.kitspares.co.uk/index.php?route=product/product&product_id=273&search=engine ok you need to fettle a bit but you stand to save lots and have a bullet proof engine -
what he said.
-
I think this is another reason for reinstating the aggregated section of Blatchat. Had I seen this I would have been able to do this today.
-
now sold
-
bttt
-
I'm in the market for a floor standing pillar drill. Needs to be 600w + I've got my eye on a Warco machine but a good condition used machine would do.
-
BJ Clubman will take SV centre deck, front storage box, side storage box, long ramps, winch, rear stands, indespension triple lock head (very secure) two winter wheels. Seen very little use (2,500 miles max) its advertised elsewhere at £1950
-
I will have an iPad retina display going cheap (well 8 actually) but not until early June. they will be basically brand new and will have been used at 2 shows (each show is 2 day long) and locked onto 1 website only (to view the clients products) will be £200 each plus delivery.
-
Before going to Flee bay thought I'd put this on here. Brand New never been out of the box Leica M-E Leica warrenty will apply, Looking for £3,200 which is a real bargin, vat invoice available if needed.
-
I beleive I have one. Blatt mail me if your still looking.
-
Nick rebuilt my car following its 90% destruction by fire. At the same time he carried out a number of upgrades. Did a bloody good job
-
Not sure this is the right forum, but Expedia is worth a look.
-
I can supply a silver stripe inc the section around the nose but even as someone who makes these, and applies graphics daily I had mine painted. As Mavic said, it is possible in vinyl but it would be a real headache and I suggest anyone with out vast experience would be unlikely to do a satisfactory job.
-
The reason I suggested disc utility is that when I recently trashed files from a D2Xs in finder for some reason although finder no longer showed the files they stayed on the card. I agree this is unusual, but I needed to use disc utility to clear the card. Therefore it seemed best to offer Zetec a sure fire result first time.
-
Don't use a go pro but disc utility should clear down the card. Hard drive - applications - utilities - disc utility - format
-
Is that £20 for both tickets for both days?
-
Dave, I'm willing to swop one for 2 club buffs
