Mavic82 Posted January 20, 2013 Share Posted January 20, 2013 Hi, Can anyone recommend a company to do a full, rebuild of my twin 40dcoe carbs as fitted to a crossflow? I know I can buy the rebuild kit but I want them cosmetically sorted as well as all the seals etc and I don't have the time with so many projects on the seven to. Thanks Guy Link to comment Share on other sites More sharing options...
Area Representative manningpaul Posted January 20, 2013 Area Representative Share Posted January 20, 2013 I am not quite sure if they still offer the service but Burlin Fuel Systems in Salisbury used to be very well spoken of. They were based on the Old Sarum road out of Salisbury on a small Industrial Estate. Link to comment Share on other sites More sharing options...
Miltec Posted January 20, 2013 Share Posted January 20, 2013 Give Andy at Mcmillan motorsport a shout, they look after the Graduates. The classic grad uses twin 40's. Very good and reliable and (if I'm honest) far too cheap for the service given 😬 Link to comment Share on other sites More sharing options...
alan c Posted January 20, 2013 Share Posted January 20, 2013 Check but I am fairly sure Northampton Motorsport will do this for you. Alan Link to comment Share on other sites More sharing options...
Mavic82 Posted January 20, 2013 Author Share Posted January 20, 2013 Thanks very much all, that's three options to try Cheers Guy Link to comment Share on other sites More sharing options...
brianmurray325hotmail.com Posted January 20, 2013 Share Posted January 20, 2013 if you know webers you'll know ron harper, he's done nothing but rebuild, specify, install and tune webers since his early twenties (he won't own upto it but he's 70 now and still racing) He is / was weber agent in the north, the webcon guys know him well......so if you want the job done properly he's your man, he takes care of my crossflow 7. by the way you'll get full hand written report on the state of yours. Link to comment Share on other sites More sharing options...
zetec Posted January 21, 2013 Share Posted January 21, 2013 Any details & costs etc please Link to comment Share on other sites More sharing options...
jonboylaw Posted January 29, 2013 Share Posted January 29, 2013 Another recommendation fore Northampton Motorsports, or try Matt at Eurocarb, they can do ultrasonic cleaning etc... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now