Miltec

Have emailed Sbd they have a 16v vx 1600 on their site so probably best bet Thanks

The standard vx1600 caterham bellhousing is the same as 2.0xe, the bolt pattern on the newer 1600 vx engines is different. The old c16nz2 in the vx1600 classic / scholarship / academy car used a 2.0xe block.

Does anyone know where a bellhousing could be obtained, z16xer engine to type 9 gearbox?

Hi Rhys Is this still available?

Hope this helps Only image I can find of the back

Hi SM25T, the site dimensions state 9cm, as per Marks blog I needed to adjust the the clips holding the lenses in, but not had an issue.

Your best bet would be talk to tundersport / Oxted group who make them. Think they are about £800 each

You could wear it while doing that if you like.

Very rare example of a beautiful watch. Dubey & Schaldenbrand and a small independent Swiss manufacturer creating watches in very low numbers for the discerning customer. This watch comes complete with the original leather strap, box (outer cardboard and inner leather) and papers, it also comes with additional leather strap making the watch wear larger than the 38 mm it is. It keeps good time if kept wound and the chronograph functions properly. Ebay Link

Link to Amazon https://www.amazon.co.uk/gp/product/B07G972T2M/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

I have these They have a halo ring that I've used for side lights, then dipped and main beam. If you want more info I'll dig it out, think they are actually for a Harley Davidsion but are E marked and work really well.

Any chance of some photos of the exhaust?

I have converted from an Old cable drive speedo to a new Stack electronic one. Then using https://www.carbuildersolutions.com/de/gps-speedo-signal-converter I have converted the standard speedo to gps, config was drive for two miles in setup mode. Using GPS app on phone the speed is +- 1 mph I guess the comments about tunnels etc are fair, but haven't had drop out even under heavy tree cover.

The cars isn't looking its best any more, where would people recommend for a respray in the midlands?

Thanks BJW that's exactly what I'm after