Jump to content
Click here if you are having website access problems ×

Tiny Tim

Member
 View Profile  See their activity

  • Posts

    619

  • Joined

  • Last visited

 Content Type 

Everything posted by Tiny Tim

  1. Tiny Tim
    I'm also looking at staying near the circuit on the night before. Does Guyers House or the Best Western have parking suitable for a trailer?
  2. Tiny Tim
    PM sent.
  3. Tiny Tim
    Hi Jonathan, is the scuttle still available? Also do you still have any of the 53/4" headlights left? Thanks.
  4. Tiny Tim
    YHM re the mirrors.
  5. Tiny Tim
    I have a pair of 7" chrome headlamps in very good condition in the garage having just replaced them with 5 3/4" units. PM me if you are interested. Tim
  6. Tiny Tim
    Looking for a pair of standard Caterham mirrors. Anybody got a pair lurking in the garage? Thanks
  7. Tiny Tim
    I think I have got a standard roll bar from a 1996 S3 De Dion chassis in the garage. Would that be any use? Tim
  8. Tiny Tim
    Have sent mail. Tim
  9. Tiny Tim
    Looking for a Caterham rear badge as fitted to Rover engined cars from around 2002 onwards. Caterham am part no. SKU: 76254 Thanks, Tim
  10. Tiny Tim
    Green with yellow stripe on the Dorchester bypass this afternoon - twice! Reg no began with S7
  11. Tiny Tim
    Is it carbs or injection? I think I have one from when I was on carbs. Tim
  12. Tiny Tim
    Simon, may be interested in the ITG filter but will have to check measurements. Tim
  13. Tiny Tim
    Hi Richard, Do you have any left for a S3 (2004)? Thanks Tim Edited by - Tiny Tim on 7 Dec 2013 22:33:07
  14. Tiny Tim
    James, I have one off of my HPC which had twin DCOEs. No longer required as I have changed to injection and fitted a new bonnet. Mine is in VGC and is blue with a silver stripe. Was going to put it on BC for sale at £100. Let me know if you are interested. Tim Seven Goes Mad in Dorset
  15. Tiny Tim
    Simon, I would potentially be interested if you can come up with a working solution. I have these on my HPC and they are next to useless. Tim Seven Goes Mad in Dorset
  16. Tiny Tim
    Cliff, I have just done mine with packing material from Powerspeed. It is long strand e-glass in bags. Just had to put the right number of bags (4 for mine) that according to Powerspeed will burn away in use. Are you coming on Tuesday? Tim Seven Goes Mad in Dorset
  17. Tiny Tim
    Mic, Are the rears for 'through' or 'under' the Dedion mounting? Tim
  18. Tiny Tim
    Jonathan, YHM Tim Seven Goes Mad in Dorset
  19. Tiny Tim
    Jonathan, I could be interested in one of these. Whereabouts are you in Oxfordshire? Tim Seven Goes Mad in Dorset
  20. Tiny Tim
    Dave, yes it is quite a tight fit Seven Goes Mad in Dorset
  21. Tiny Tim
    Might seem a silly question but has the filler cap surround been fitted the right way up 🤔 I recently bought an aero filler cap and pipe as part of my upgrade to throttle bodies and the filler cap surround has four cut outs which can be seen when the centre cap is removed. One of the cut outs is bigger than the rest and must be fitted at the 12 o'clock position. This allows the collar on the fuel nozzle to go in. I have both the aero filler cap and the pipe with the flap still fitted and have (so far!) no problems with filling up either in UK or France. Seven Goes Mad in Dorset
  22. Tiny Tim
    Thanks Roger Seven Goes Mad in Dorset
  23. Tiny Tim
    Anybody know a part no. for the expansion tank cap on a VX HPC? (Rectangular type tank). Something I can get from halfords or a local motor factor if possible. Thanks Seven Goes Mad in Dorset
  24. Tiny Tim
    BTTT Seven Goes Mad in Dorset
  25. Tiny Tim
    Rik, YHM Tim Seven Goes Mad in Dorset
×
×
  • Create New...