Paul Thompson

Hi I have a set of 16" Kuhmo's that I have run on my 964 and Boxster. Plenty of grip and they get nice and sticky when warmed up. Certainly prefer them to Conti's or SO1 Bridgestones for trackdays, the wear rates are a bit alarming but they are cheap enough to buy.

DSL - As originally posted had exactly the same problem when I built a Fireblade 5 years ago. You need to fit Dynojet needles. After that no problem. James Whiting used to have the kit or try a local motor bike shop.They come with very easy to follow instructions.

You just can't help some people

Have the carbs been treated to Dynajet needles ? From what you say it sounds like there is not enogh fuel getting through. Also what pressure is the fuel being delivered to the carbs?

Hi I have 5 of 5.5x 13" Minilites with some road tyres if you are interested. Paul

what pitch - de dion or a proper axel ?

Horrible!

Please check the measurement. I have an outer that is 3 inch wide.

If this is Andrew's old car with the Goode silencer he should be OK unless Andrew knocked the stuffing out of it. My car was tested at sub 100dbls at Cadwell last month and it has done a few more track miles than Andrews car. Just make sure the engine is nice and warm before the test and lie about the maximum revs. If really concerned get Goode to repack the can.

Paul Harvey in Shoreham is your man. Sounds like your dogs are b*ggered.

Better open the Italian Branch then

Luigi Send me a blatmail and I will e-mail some pictures. Trevor You volunteering to take it on then?

Now that Ash's car is sold. Please make my car cleaning rota easier. Regretably I need to sell my Fireblade which was Registered April 02 on private plate (negotiable).Just Mot'd but on a SORN at present. It started out as a "cheap " alternative to a R400 but somehow ended up with all the extras viz: RR-W engine with a refreshed gearbox , KN filter, Dyna re-jetted to suit. Dry sumped Caterham yellow with purple nose cone and Carbon Fibre Wings Goode Fabrications Silencer (98db) Alloy radiator Nova Reverse gearbox Alcon 2-pot alloy front callipers (more effective than 4-pots) Rear disk brake conversion Quaife ATB LSD Wide track front suspension Barnby Wheels with Avon ACB10s Leda alloy adjustable dampers with uprated springs Roadsport full rollcage Tillet composite seats 6-point Willans harnesses Reprogrammable shift lights Plumbed-in fire extinguisher Battery master switch Honeycomb alloy boot floor 5 ¾” Headlights Digi Gear indicator Jill Judd Tonneau 415kg with fuel and ready to go. All the engine work on the car has been done by Paul Harvey. It can be seen at Cadwell on the 23rd April. £15,000

Having had the same problem with B*S three piece magnesium wheels I switched to one piece Dymags on my M3 last season and have had no problems since. Also they keep their pressure alot better.

5 of 5.5X13 Minatours with nearly new "eastern "tyres with caps and wheel nuts very good condition suitable for Ital or earlier axel cars £200

Atinod Why ? It isn't a lorry - enjoy it sliding

I have the following codes for "Caterham Yellow" Solar Yellow - ICI PO30 99 72 or Glasuit VWL 10/00w Porsche 139(Blutengelb), or DuPont receipe : AM44 649g AM51 658g AM7 668g AM1 672.6g AK100 1160.6g Hope this helps

The Register - Ah ! I thought that this would come back and haunt me ! After suffering all sorts of PDA malaises I have found one from 2005. Which I am embarrassed to say does not have the details of Andrews car on it. However if all those with Whiting Fireblades out there will e-mail the details of their cars to me I will update it and circulate it

Noger No you cannot do a simple swop - being Honda every thing changes. But before you get too smart about the 130bhp! have you driven a Fireblade ?

If anybody is interested I have a reasonably specc'd one for sale at slightly less money and will pay normal commission rates for a sucessful introduction.

De Dion or Ital axel? I have five 5.5"x 13" cluttering up the tyre store for an Ital axel.

A mid grey or silver. Have you found some wheels ? Paul Matty has the hub caps.

John I have a set of 5.5 "x 13" Silver Minatours that I have replaced on my car with the correct period wheels. They are in good condition with some tyres I have never heard of ROADSTONE DH-60 185/60 also have all the nuts and caps. I am based in Guildford if tyou are interested call me on 01483 893358. Cheers Paul

Or you could get me a few brownie points by buying 5, 5.5" x 132 Minators that came with a Series 2 fitted with some strange tyres. Blatmail me if you are interested in very good condition with wheel nuts and centres replaces by the correct wheels.

Thanks Guys as ever a great deal of info. Looks like I am too impatient. Your right Geoff Honda's are much less troublesome.