Jump to content
Click here if you are having website access problems ×

Kingsley Young

Area Representative
  • Posts

    616
  • Joined

  • Last visited

Everything posted by Kingsley Young

  1. Now gone. Donated to the local hospice shop.
  2. We have for sale my Wife’s GO-GO SPORT Mobility scooter ! Reason for sale, she has a new one. The scooter is in good order, new battery in the last two months and we fitted the spare set of Blue trim, which was all new ! There are armrests to fit as well. £200.
  3. #15 I have the 150 Roadsport and I would forget sending the ECU to the factory and try to get to either Team Leos Motorsport or the two Steve's in Raynham they will be able to sort the problem! Kingsley.
  4. Yes please Dom Kingsley
  5. Thanks again John hope to try that later. Kingsley
  6. Hi John I did install the new code of 038544 that has given me the speedo reading of what I gave out last night ,before that the speeds were reading higher. So it is definitely better. thanks for your help. Kingsley
  7. Thanks John its a strange one about 2-3mph out at 40 ish a bit more at 80mph, not too sure what adjust the speedo to ? Kingsley
  8. Can anyone please give me the speed sensor input figures. rear tyres are Avon ZZS 245/40/R15 thanks Kingsley
  9. No you don't they are a straight swap ! mine were just spade connectors. Kingsley
  10. I had a lightened Flywheel fitted to my 150sv a few years ago now . I purchased the Flywheel from TTV Racing and had Team Leos motorsport fit it for me. Very worthwhile upgrade . Kingsley.
  11. I would certainly go back to him and have a chat. It is a re-map that he does and adjustment to the throttle bodies. The other thing I did as to have a lightened flywheel fitted, that also was a fantastic upgrade to the car. Kingsley
  12. Yes it has, also a friend of mine has a 150 and went the same route two years ago, having had his car since 2008 , the car has never performed like it ! Im told Steve G sorted the 150 out for Caterham but they had already made there minds up to go to the 140 as they could take the 140 engine unit straight out of the box and put it in the car ! Luke Stevens at Team Leos Motorsport has Steve work with him at his rolling road in Fordham near Newmarket should that be easier for you ? Kingsley
  13. I have a 150 and Steve totally sorted it , absolute pleasure to drive the car ! Kingsley
  14. It may not be as close as you are looking for but Team Leos Motor Sport based at Fordham near Newmarket Suffolk have a state of the art rolling road set up. They are Caterham specialists, you can find there advert in Lowflying. Kingsley
  15. Yes I too have had this problem, Luke Stevens of Team Leo's Motorsport has been working on my car and flagged up the same issue. I know he ordered at least five from various sources and they were all wrong ! it may be worth you giving him a ring before you order any more. His number is 01638 720965 Kingsley.
  16. I think that if you have owned the car yourself in Jersey for a number of years you would not have to pay VAT on entry, as for fog lights and reversing lights that may be a requirement . check it out with those that do know though ! Kingsley
  17. Tazio You could try Phil at road and race. kingsley
  18. Be very careful with CR500s These tyres had not done many miles only about 5000 if that , admittedly 8 years old but please check yours !! Kingsley
  19. I used TTV and spoke to them directly, it was some time ago ! maybe they don't start back until next week or maybe COVID in the camp ? They were very good when I dealt with them. Kingsley
  20. They are one of the same company in St Ives Cambridgeshire.
  21. I have four winter wheels from my BMW X3 2014 model , which I have now sold. Tyres have a good tread left on them, rims are fine but do have a little winter corrosion. Photos available, probably would need collecting. £250 Ono. Kingsley
  22. When I had my Xflow I had a Moto Lita stearing wheel , I made my own adapter using a piece of 1/4” alloy. Once I had cut it out and trimmed and finished it off, I sprayed it with Satin Hammerite . Bolted the Motor Lita to the spacer , then marked it up to take the quick release boss. It worked out well Kingsley
  23. I do have CSR rears on my SV but you will need 5mm spacers. Kingsley
  24. Richard I don’t think you will be disappointed with the product , I’ve had mine for a couple of years now and been very pleased with the result. As you can see the Picture they had printed for me was first class ! good luck Kingsley.
  25. I had this made for the Duratiles They do come out well Kingsley
×
×
  • Create New...