BigCol
-
Posts
2,660 -
Joined
-
Last visited
-
Days Won
15
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by BigCol
-
It’s simply a scrap bit of tin, cut, shaped and drilled so the screws match the side/knee panels’ holes and then sprayed satin black.
-
I installed a CTEK socket in the cockpit under the dash on the passenger side (as that’s adjacent to where the charger is in the garage) If I was to do this again, I’d use one of these indicator connectors:
-
Stuart at Premier Power recommended blue coolant in my Sigma and I use Comma Xtream G48. No issues to date.
-
Stuart’s recommendation was a Stant Motorad racing radiator cap, 21-25lb.
-
I have one of these in black as recommended by Stuart at Premier Power.
-
The sensor is apparently susceptible to damage through engine vibration which is why many folk recommend fitting a remote adaptor so the sensor can be isolated (see one of my list of winter jobs!)
-
I fitted a connector for my CTEK in the cockpit - so no need to remove the bonnet to access - which goes direct to the battery: edited to add, if I was to do this again, I’d use the adaptor @MattB references above.
-
So’s mine - and it has a Type 9. Mazda ‘boxes were used from late 2013 I believe.
-
These are jolly good…. a much neater solution than the multiple miniature bulldog clips I was using to restrain the flappy bits before!
-
Like this you mean…
-
Message received and responded to. 👍🏻
-
Guess 1litre capacity (🤷🏼♂️)… with fittings as per photo £25 + £5 for me to ship it if you don’t want to collect from Chiswick W4.
-
I think JV’s diagram was deliberately from the driver’s point of view - with the headlights being ahead…. 🤔😀 -
Suspect you’re right (and am still not sure exactly how I ended up with two sets! 🤷🏻♂️ )
-
@BJH_360S I (think!) I have a spare EaziBleed system if you want it for the price a beer and postage…
-
Indeed - but some folks dislike PT, the only time I asked them for a favour, Ian was very helpful but I’ve never used them for any work... I have nothing but praise for Andy et al at PGM. If you’re nearby, it’d be good to see you at the monthly Hare & Hounds West London get-together…
-
I live in Chiswick and travel down to PGM for my suspension set-up. PT in Maidenhead might be an alternative.
-
A lot of the chaps I tour with each year use R888Rs and love them - have a look at post 52 in this thread…
-
👍🏻 without wanting to appear a potential stalker… which bit of south London?
-
if it’s collection only, would be useful to know where you’re based…. 🤷🏻♂️ if west London-ish, I’d be interested.
-
Whilst not an answer as how best to search, @graearea has 3D-printed a longer knob for himself (oo-er Mrs)
-
This is the stuff I used… and yes, it needs a bit of glue to keep it in place.
-
I’m confident you’ve a few years on me, Stephen, but I didn’t realise Sir Isaac was a contemporary of yours! 🤔😳🤣🤣🤣
-
Reply en route…!
-
Yup! The extra bit reduced the turbulence for me - it’s a standard rubber profile from Car Builder Solutions.
