TonyR

James7 Minators have black centres. Tread is 2 x 4mm & 2x 3mm Wheels are in Rotherham. Tony.

alancal YHM Tony

Myself & a local owner are having a garage clearout: Set of four 6 x 13 Minators in good condition with Yoko A048rs (medium compound)£240 sold Pair of 9 x 13 Caterham 8 spokes - Anthracite with 245 x 13 worn CR500's £240 Pair of ACB10 - 4mm tread(soft compound) 8 x 22 x13 £50 Pair of ACB10 - 4mm tread(soft compound) 7 x 22 x13 £40 Tall FIA Roll Bar Good condition (Imperial S3) £160 Pair of standard front calipers £40 Chrome flip up petrol cap (with 2 keys) not flush fitting £25 Pair of Wipac reversing lights £15 Sold...... Pair of Front indicaters (Clams circa 1989) £10 K series round expansion tank & cap in excellent condition £10 Photos available Tony Edited by - tonyr on 4 Feb 2011 14:31:07 Edited by - tonyr on 7 Feb 2011 18:24:01 Edited by - tonyr on 28 Feb 2011 11:48:06

The standard bilsteins are pretty good. After all Caterham did a lt of R&D on the set up!! They still put in some pretty quick times on circuits & speed events using the standard shockers. Tony. Edited by - TonyR on 27 Jan 2011 10:38:31

It's not too difficult to modify to fit a metric S3 Thanks for the info Pete.

Paul, Not sure if it will fit a metric chassis, I will try to find out. Tony

Tall FIA roll bar to suit imperial S3, in good condition £160 Tony

Simon YHM. Tony

Phil & Carl You both have blatmail. Tony.

2nd dibs if Stuart doesn't take the wheels Tony Edited by - TonyR on 14 Jan 2011 11:14:59

Looking for Caterham 13" Anthracite wheels 8 spoke wheels 2 x 6" x 13" 2 x 8" x 13" TonyR

20 litre drum of Gulf fully synthetic oil 5w - 40 Buyer ideally collects £85 Edited by - tonyr on 13 Jan 2011 14:08:44

Chris You will need remove the hubs and split the hubs from the discs. Tony.

Jez, Tried blatmail again as not received one from you. My email is antony.robinson@virgin.net mobile 07875 690067 Tony

2nd Dibs please. Tony

Hi, I will take the windscreen washer kit, inertia switch & timing strut. YHM Tony

You have mail

They are the same bolts as used for the roll bar from above the rear shock absorbers, and have reduced heads. Tony

Carbon Bits certainly do a nose cone as I was at their workshop a few weeks ago and was shown an example. Not sure about bonnets but you could contact Steve or Nick on 01606 554788 Had a pair of sills from them and the quality was excellent now having a full set of wings made. Tony

Another good one here Edited by - TonyR on 30 Oct 2010 20:58:38

While on the subject of poppers. How can you identify the base of the pull the dot type base (more secure type) against a standard base? Tony

Caterham state up 10 bhp on standard 210 bhp R400 when installing roller barrells. I'd be interested if anyone has had theirs on a rolling road to verify outputs.

Same answer as other Sprinters recommended on your original post !! Caterham 6 speed

Never had a problem with my Superlight exceeding noise levels withthe same exhaust as yourself. Tony.

That will be great. It appears the bottom wishbone was fastened using a widetrack spacer nut and the top wishbone was bolted onto the top of a fitting in the upright Thanks, Tony