lotusdave

i have over 30 years of low flying magazines free to good home ,collection from north wales as they are heavy david

how does the petty strut fit with tillet passenger seat in place ,the high back is in the way, david

thanks everyone richard would you put this on dry david

where is the best place to buy 1800 k series inlet manifold gasket caterham dont seem to have them on their site, ebay list one im 513 not sure if thats the correct one david

yes the z terminals are the only bit i cannot do david

maybe caterham could help if i phone them its only the spade connector 2 is the problem david

yes have wiring diagram but it does,ent show everything, what i have found is the brown wire with pink tracer which is from the coil connector which has a white thin wire with black tracer next to it goes to the mfu i think that is the wire to splice into , as the purple wire in the loom that is referred to above on my car is the ecu wire and goes to fuse box and is a lot thicker than all the rest and i dont think is the one david

ok thanks john will look at that now david

ok thanks ,looking on the web it shows breaking into the wire to the dizy from ignition and routing it through the 2 connection which sounds correct , its finding the right wire with a meter i guess

have done all connections apart from connecter 2,one side to ignition thats ok,the other says coil not sure where and how can anyone help david

As supplied by caterham ,2 x 5 litre ,unopened , millers xl long life fully synthetic 5w-50 ,no longer needed £65 or £35 for 5 litres

rich can i order one please sorry never got back to you, i have a s3 imperial car with carbon nose,do you do paypal david

jonathan understand know thanks , will try this in the next few wks david

jonathan am back at home on sunday , not sure what you mean i will look and see what model i have, all i know is i have i thick brown on its own, and the oval connector which pushes into the back with the three wires coming out which are red blue and yellow david

jonathan if i connect the loom thin brown,yellow tracer to the 3 wire connector red r and blue to battery and then yellow to ingnition, i have the thin brown yellow which connected to old alt, but no warning lamp i dont think, is this correct david