Steve Cornford

Do you have a heat shield fitted? If so might be worth removing & checking that the rattle is not coming from the heat shield, as the spot welds holding the "U" barckets to the shield through which the jubilee clips pass can fail. (Mine did) Sigma SteVe

Twas me visiting a friend in Bickley, en route from Braintree to Brighton. Thanks for the spot 😶‍🌫️ Sigma SteVe

Hi John What type of Diff. are you using? Sigma SteVe

Yes, twas me & swmbo, I have now got the Le Mans parking tickets. Do you stil want one? Sigma SteVe

IMHO the best ones are here, scroll down till you get to Oberon Licence disc holders. Nicely made with flush screws, but unfortunately out of stock at present. I have a spare CC chrome one, but the screws are not flush. You are most welcome to it. Blatmail me if you want it. Sigma SteVe

Hi Guy, Yes thats me near the clock tower. I wont be able to make a blat this weekend unfortunately, maybe next weekend Sigma SteVe

Hi Guy, Sorry I missed saying hello. Early weekend morning fine by me. I might even be tempted by one of those 'sunrise' blats. Sigma SteVe

See you there The sky is clearing Sigma SteVe

Hi PeterPi, Fine by me. Where shall we meet? I shall be starting from Queens Park area. Sigma SteVe

Hi Chris & Guy Are either of you going to the East Sussex meeting at the Red Lion tomorrow (Thursday 26th) 🤔 If you are & the rain stops in time care for a blat 🤔 Sigma SteVe

Also worth kacking up the rear & checking that the bearings are not worn. You should not be able to"rock" the wheels. Sigma SteVe

Yes that was me, probably on my way to Bucks Barn te meet the West Sussex guys for a blat to the Gribble Thanks for the spot Chris How is your engine? What shop have you? Thanks to Andy & Keith for shepherding me to the Gribble Sigma SteVe Edited by - Steve Cornford on 13 Mar 2009 12:29:46

Spotted taking the sun outside some lockup garages... Sigma SteVe

Hi Phil, Sorry to hear whats happened. Please let me know if the EVO set are suitable. I have 14" Minators, and would be interested in a set, as I too keep car on driveway. Sigma SteVe

...Thanks for the spot... Good job I had the hood down then.. ...were you in an MX5? Sigma SteVe Edited by - Steve Cornford on 16 Feb 2009 09:55:38

Hi Ben, How is it going 🤔 I also purchased Shift-i lights, but haven't got round to fitting them yet. Lets hope someone comes along with the info It would be useful to have the details on how to do it in the new Wiki section. If I dont see you before, I hope to see you on the Baywatch run. Sigma SteVe

Forget the Aero filler, unless you you dont mind the hassle of filling up using the Hunchback "euro" nozzles and a wire coat hanger ❗ Sigma SteVe

Jason Have you done that? Did it cure the problem? Sigma SteVe

Are the new "batch" of rads still plastic/metal combination? Sigma SteVe

Seeing as how many of us Sigma owners are having radiator problems, I though I would ask how many are having trouble with Wobbly Headlights. The metric chassis has a different fastening for the top headlight stabiliser bar. It is attached to the chassis in a tube, with just one screw holding it into the tube, whereas the Arch chassis had a split tube with two bolts clamping the bracket in the split tube. The result in the metric chassis is that as there is only one point that the bracket is fastened, there is I believe a tendency for harmonic vibrations to occur. I have mentioned this to CC at at least two services, but all they do is tighten the screw to say they have fixed it. Are any others getting this symtom 🤔 Seems worse on my offside headlamp, and once you've noticed it, it is hard to stop noticing it. Sigma SteVe Edited by - steve cornford on 16 Dec 2008 18:32:56

Ditto from me ❗ Leaking radiator x *mad* After the third one blew, repaced it with the all metal triple pass. Once the radiator goes, if you have topped the system up,and dried everything off, start the car and when all is warm, you will see water appearing around the seam where the black plastic top part is crimped to the the metal part. What temperature is the radiator fan coming on at? Sigma SteVe Edited by - Steve Cornford on 16 Dec 2008 09:53:53

Inside leg measurement (lower edge between the inside radius corners) 90cms. Outside leg measurement ( between the bottom pointy bits) 102cms. /<--- 90 cms ---> / /<---- 102 cms -----> Sigma SteVe

On my factory built sigma 125 - metric chassis, the washer bottle bracket is rivetted centrally to the passenger front footwell panel. This sometimes produces a rattle caused by (un)"symapthetic" vibrations at certain levels of washer fluid. Sigma SteVe

CC have already been involved in research & development of a "Coretex" (carbon fibre braid) de Dion tube see Coretex de Dion Weight came in at 4.8kg, a 36% saving over the standard 7.68kg In fact a complete 7 chassis based on the CSR has been producedCoretex Chassis Sigma SteVe

You probably need to visit an audiovestibular physician or put more pressure on the loud pedal! Sigma SteVe Edited by - Steve Cornford on 9 Aug 2008 15:35:26