Jump to content
Click here if you are having website access problems ×

andydavy

Account Inactive
 View Profile  See their activity

  • Posts

    105

  • Joined

  • Last visited

 Content Type 

Everything posted by andydavy

  1. andydavy
    Me too!!
  2. andydavy
    Currently have 7" but about to fit lowering brackets so might as well think about going 5 3/4 led units. I know lots has been said before but whats the very latest recommendation. Andy
  3. andydavy
    Are there any instructions or photos of fitting?
  4. andydavy
    me too. would be great to have some fitting instructions when the brackets arrive
  5. andydavy
    Yes please
  6. andydavy
    I'm interested
  7. andydavy
    It's 2003 so assume its an EU3?? Also what spark plugs should it have?
  8. andydavy
    My xpower 140 seems to have developed an issue. On hard acceleration it seems to stutter / misfire between 2000 and 4000 rpm. It idles and starts fine and has just passed MOT emissions tests. It has been sitting for a couple of weeks. Lat trip it seemed to clear itself after a good hard run. This time it hasn't. Any ideas where to look would be welcome.
  9. andydavy
    Depending on what you want to pay I may have.
  10. andydavy
    Send them to tsk
  11. andydavy
    Following with interest as I have the same sort of knocking / slapping and I can't find the source
  12. andydavy
    Suspect what you have actually bought is a spare wheel carrier that has been "cut" off. Without the original bits that were part of the chassis you will struggle.
  13. andydavy
    Interested in dip stick can I have photo please
  14. andydavy
    I tried that dipstick. Firstly the ball wouldn't go down the tube. took that off and then the kink won't go down either.
  15. andydavy

    Roll bar.

    andydavy posted a topic in TechTalk

    Went to remove my rollbar today and discovered I didn't need to remove dampers as roll bar was bolted as per photos and did not have the "half bolts". Is this an issue??
  16. andydavy
    I bought one of these and the ball wouldn't go down the tube. I removed it only to discover the "kink" also will not go down the tube!!
  17. andydavy

    Respray midlands

    andydavy replied to Miltec's topic in TechTalk

    I'd take it to tsk
  18. andydavy

    Thread size

    andydavy replied to andydavy's topic in TechTalk

    brilliant - thank you
  19. andydavy

    Thread size

    andydavy posted a topic in TechTalk

    Can anyone tell me the thread size and pitch for the bolt that fits in to hold a wind deflector. Its a 2003 K series imperial chassis
  20. andydavy
    Thanks Piers Any idea where you can buy it or a very close match?
  21. andydavy
    Should have said repray!
  22. andydavy
    Need to resray my anthracite 8 spoke alloys. Does anyone know a good colour match paint?
  23. andydavy

    side mirrors

    andydavy replied to andydavy's topic in For Sale

    pm sent
  24. andydavy

    side mirrors

    andydavy posted a topic in For Sale

    Pair of the mirrors that attach to windscreen stanchions. Ok condition but need a clean - come with fixings. £15 plus £5 postage.
  25. andydavy
    looking for a set of four with at least 3.5mm tread. or anything else suitable for road with occasional track use.
×
×
  • Create New...