BAZZA
-
Posts
627 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by BAZZA
-
Griff, the bracket you show is for the drive shaft driven non stack sensor, make sure you have the correct drive shaft as well. You should have a plain shaft not one with a toothed ring on it, also chenk that you have the correct sensor. All of this was wrong on my car Barry R400 Duratec No. 001
-
Mine is finished apart from the exhaust guard and a few niggles, but it has taken a while. Neil make sure you have the correct mounting plate for the stack wheel speed sensor, the one shown on R300.net is for the drive shaft mounting you will need one for the front hub. Barry R400 Duratec No. 001 Edited by - BAZZA on 22 May 2007 07:48:03
-
Bertie, having worked in the lube oil blending field for a short time I would say that the number of blends around the same base oil can be quite mind blowing!as there are many different service factors that influence the product make-up. Barry R400 Duratec No. 001
-
So the 5.5l with oil cooler seems about right, I have the disappearing oil on on dipstick phenomenom that I now know hsa been experienced before Thanks chaps. Barry R400 Duratec No. 001
-
Can anybody tell me the oil capacity of a 2.0 l duratec with a Raceline wet sump please? Barry R400 Duratec No. 001
-
Jonny, If you can't sell the heater on ebay i will pay your reserve if that helps. Barry R400 Duratec No. 001
-
Got it from Mark D thanks Mark Barry R400 Duratec No. 001
-
Thanks Mark Barry R400 Duratec No. 001
-
Mark, is this more comprehensive than the handbook, if so can you forward it to me please. Barry R400 Duratec No. 001
-
Don't matter how light it is if it don't fit under the car Barry R400 Duratec No. 001
-
loads left over, loads missing, loads don't fit, pretty normal really. Barry R400 Duratec No. 001
-
Mark, the user guide is in the car handbook, I can copy mine for you if you like? Barry R400 Duratec No. 001
-
I have just bought one from MM on advise from here, 110 mm min height, fits under 7 fine. Made of steel so a bit heavy. £35 part no. CTJ 2LR Barry R400 Duratec No. 001
-
Yes Rob I know it's a funny size so probably 10 but it was late! I should get good temp data from my one when it's running as it has stack. Maybe an oil stat is worth considering as well. Barry R400 Duratec No. 001
-
Morning Rob, as requested I checked my oil cooler last night and it is a nine row one? Barry R400 Duratec No. 001
-
Richard, Caterham use the Raceline sump as well! Barry R400 Duratec No. 001
-
Rob, it's about 13 but I will check tonight and let you know. Barry R400 Duratec No. 001
-
Hi Rob, I am building an R400 now and it has a Mocal air/oil exchanger mounted in front of the rad. This is a Caterham setup and the have brakets that bolt to the side plate on the rad which hold the cooler, they also have a cowl around the rad fan at the rear of the rad. Due to the newness of the car this whole setup is still evolving as I build my one and cooling seems to be quite an issue. Barry R400 Duratec No. 001
-
Sunday morning 10 am, near the sports centre. Barry R400 Duratec No. 001
-
Guy,YHM Barry R400 Duratec No. 001
-
Right, that one looks like it will do the job! I measured my one and the min height was about 130mm so its off to M/M saturday morning,shame I can't wait as they are doing a 10% discount thing later next week. Thanks to all for their help. Barry R400 Duratec No. 001
-
Right then chaps, I'll give it one more go tonight with the one I've got and then see if I really need a nice new shiny one Thanks for the help so far. Barry R400 Duratec No. 001
-
Thanks for that Ric but I think they are all too high. Barry R400 Duratec No. 001
-
Has anyone got one of the BB jacks or any other low height trolley jack they want to sell as my existing one doesn't fit under the new car. Thanks. Barry R400 Duratec No. 001
-
Peter, if you want the half doors they are yours. Barry R400 Duratec No. 001
