Jump to content
Click here if you are having website access problems ×

Adding labels to dashboard controls


Martin B2

Recommended Posts

Hi all I've nearly finished my 160 and am going through the IVA stuff. What is the consensus about labelling the dashboard controls e.g. Indicator switch, horn, flash with some symbols on label? Is it needed for the IVA and is there a good source for the symbols that I can print out on some sticky vinyl that I can apply to the dash.

thanks for your help

Martin

Link to comment
Share on other sites

I made some labels on the computer and printed them before using a clear sticky film to fix them to the dash.  I can send you the file if that helps.  I think it is a CAD file so I could get the dims right but I can pdf it if you prefer.

http://1.bp.blogspot.com/-tsrKZLTFa88/U1KGxmWTCUI/AAAAAAAAAqU/8U3MooAnjh0/s1600/small-DSCF0974.JPG

http://3.bp.blogspot.com/--iP6J_n2HyI/U1KGx2y_OCI/AAAAAAAAAqY/eGuNKmwOLzI/s1600/small-DSCF0975.JPG

 

 

Link to comment
Share on other sites

Do you want the labels for just the IVA or permanent? If just for the IVA then do what I did - cut out some small bits of paper and write "horn" "high beam" etc. on them and then stick on the dash with cellotape! Nothing more sophisticated is required. I read somewhere that their car passed IVA with post-it notes stuck on the dash!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...