ScottR400D Posted December 6, 2021 Share Posted December 6, 2021 #49 The point is that if you remove your (41mm) nuts you'll likely be replacing them and the replacements will be 42mm. You'll need both sockets. Link to comment Share on other sites More sharing options...
GulfSeven Posted December 6, 2021 Share Posted December 6, 2021 I bought this one recently: https://www.ebay.co.uk/itm/203261004791Seemed the cheapest one that was a known brand (Draper Expert).I also bought this 1/2" to 3/4" drive adapter (also Draper Expert) so I could use it on my standard torque wrench: https://www.ebay.co.uk/itm/203261004610 Link to comment Share on other sites More sharing options...
Neil220 Posted December 6, 2021 Share Posted December 6, 2021 Why would you need to use a new nut? Link to comment Share on other sites More sharing options...
John Vine Posted December 6, 2021 Share Posted December 6, 2021 I wonder who'll be the first to add a 42mm socket to the Equipment for Loan Register? There are 11 41mm ones there.JV Link to comment Share on other sites More sharing options...
John Vine Posted December 6, 2021 Share Posted December 6, 2021 Why would you need to use a new nut?Good engineering practice on a safety-critical part. JV Link to comment Share on other sites More sharing options...
John Vine Posted December 6, 2021 Share Posted December 6, 2021 Re #54:Looks like a certain Mr Arundel wins (post #39).JV Link to comment Share on other sites More sharing options...
Neil220 Posted December 7, 2021 Share Posted December 7, 2021 "Good engineering practice on a safety critical part" I didn't realise it was Nylock nut! Link to comment Share on other sites More sharing options...
Area Representative paul richards Posted December 7, 2021 Area Representative Share Posted December 7, 2021 Front hub but is not much more than finger tight. You can use an open ended spanner, ring spanner or even a pair of grips. Link to comment Share on other sites More sharing options...
Handwheels Posted December 9, 2021 Share Posted December 9, 2021 I've got a 42mm one available here in Essex, plus a 1/2" to 3/4" adaptor. Sent details to Shaun for the club equipment listRichard Link to comment Share on other sites More sharing options...
John Vine Posted December 9, 2021 Share Posted December 9, 2021 Thank you!JV Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now