Jump to content
Click here if you are having website access problems ×

Markiebabes

Member
 View Profile  See their activity

  • Posts

    8,543

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Markiebabes

  1. Markiebabes
    Hi John Hope you had a great time in Wales 😬 Doing a search and i am also looking at the same as you (should have got together ) Just searching and found this hereand here May help keep me updated as to how you get on 😬 Cheers Mark Superlight R 400 Edited by - markiebabes on 13 Aug 2007 22:47:31
  2. Markiebabes
    Thanks ECR *thumbup* Just ordered the comms cable from SBD 😬 not cheap though 😳 Mark Superlight R 400
  3. Markiebabes
    Hi James, i have that exact model pump 😬and use it on the seven (dry sumped)and my smart (they have no sump plug) great bit of kit Ditto to Dave above works a treat *thumbup*ten minute job and No mess got to make sure it's at the very bottom of sump though,as there are a few ledges, that can seem like you are at the bottom,then just pump up twenty times, go make a cuppa and hey presto all done Cheers Mark Superlight R 400
  4. Markiebabes
    Silver Audi estate towing a seven on a trailer not sure of colour you had just turned at a round about as i got to it 😬 we were on way to Burford down twisty's 😬 for the Mega Blat Mark Superlight R 400
  5. Markiebabes
    ECR MBE 967 i have the serial port lead already patched in to ECU already downloaded easimap 5.1 Is this ok or should i remove it and put easimap5 on? agree with getting some who knows to save existing map 😳 was a bit wary of just connecting it start up screen looks great (on demo) will have a look on monday Cheers Mark Superlight R 400
  6. Markiebabes
    Slight highjack sorry 😬 Numpty Question re MBe ECU I have a R400 with a data lead (D plug )attached to MBE ECU, is it just a case of connecting a lap top to this lead and then i can read the installed map?? How do i know which esaimap version i need to read if this is the case? Can i cause a problem with ECU(corrupt) with this approach?? TIA Mark Superlight R 400
  7. Markiebabes

    Burnham (Bucks)

    Markiebabes replied to Tam's topic in Spotted

    Lower Britwell road *eek* Drive it like you stole it comes to mind 😬 😬 Mark Superlight R 400
  8. Markiebabes
    OMG 😳 😳 😳 😳 Could have been Very scary is this the result of pot holes or fatigue 🤔 Mark Superlight R 400
  9. Markiebabes

    exhaust sealant

    Markiebabes replied to IKB's topic in TechTalk

    That would be on the wednesday 15th August at the Navigation then I may pop over to oxford area meet tommorrow night with penn sevens guy's 😬 John, will post here (if i can go) tommorrow morning 🤔 if thats of help Mark Superlight R 400
  10. Markiebabes

    exhaust sealant

    Markiebabes replied to IKB's topic in TechTalk

    Hi John i have used a high temp(400c) silicone sealant on my previous car Motor-Serve in Wolverton do it (made by Granville i think) Only problem i found was taking the exhaust apart again can be a pain 😳 Cheers Mark Superlight R 400
  11. Markiebabes
    Lots of post on this one but try here Mark Superlight R 400
  12. Markiebabes
    Thanks Darren *eek* Dont tell SWMBO i am looking 😬 😬 Mark Superlight R 400
  13. Markiebabes
    Hi Nick I changed to A48's (have soft all round) from Cr500's and very impressed 😬 they are lasting so well, nearly 5000 miles including Le Mans,St Moritz and Milton Keynes roundabouts ❗ front still like new *eek* need to try harder 😬 Mark Superlight R 400
  14. Markiebabes
    Mat, For a change 😬 😬 Out blatting about that time, though no spotted's DJT, made good time if the same car Mark Superlight R 400
  15. Markiebabes
    Kristoffer, Have used Autoglym radiant wax to good effect or you could try renovo Product Code U216 Description Renovo Plastic Window Polish Mark Superlight R 400 Edited by - markiebabes on 30 Jul 2007 18:56:11
  16. Markiebabes
    Red/ali with clams 😬enjoying the sun 😬 Just on way to pick Swmbo up from her hairdressers in Crowthorne i you what a fantastic day for a blat Mark Superlight R 400
  17. Markiebabes
    andy 7homas 😬 Was that you on way back from Penn 7's 😬 hope the relay stayed in Weather can only get better Mark Superlight R 400
  18. Markiebabes
    Will these be the all right for the job?? here Superlight R 400 Edited by - markiebabes on 28 Jul 2007 21:52:52
  19. Markiebabes
    Thanks for bringing that up Ian Superlight R 400
  20. Markiebabes
    Steve Not that i am aware of 😳 2nd owner. CC told me that tank was faulty/bad quality ali. Not leaking on corners but porous on front panel so was difficult to trace apart from condensation about half way up 😳 Maybe a few tanks had this problem ??? Well worth calling CC and see if this is a ongoing problem 🤔 Cheers Mark Superlight R 400
  21. Markiebabes
    Hi Steve, I had a leak 😳and found it to be the tank was porous, seaping fuel out of the front of the tank(felt like condensation) 😳 CCsouth said it was seals, but couldn't find any traces of a leak apart from drips off the bottom ( was told it was a badly made ali tank ) New tank all sorted now 😬 2003 vintage car Hope this helps 😬 Mark Superlight R 400
  22. Markiebabes
    😬 😬will do Mark Superlight R 400
  23. Markiebabes
    That will be 6SpeedManual (peter) I know he was planning to do some of the passes over there 😳 😬 😬 lucky bu66er 😬 😬 Hope he was making good progress 😬 😬 and the weather was good 😳 Mark Superlight R 400
  24. Markiebabes
    We were all at Millwoods 😬 Superlight R 400
  25. Markiebabes
    Ian, Try one of these pela oil extractor pump excellent bit of kit about £30 on ebay. Used mine this week to change oil so easy 😬 Superlight R 400
×
×
  • Create New...