Gambo

didn't realise having petrol and petrol vapour around a running engine was considered safe

here Edited by - Gambo on 21 May 2009 14:49:54 Or here Or search Nitrons, plenty of reading material. I even think my name pops up a few times Edited by - Gambo on 21 May 2009 14:52:29

I had a soft bits half hood, And yes they are great. On cooler days, and a little bits of rain, But 'proper' wet roads they are a disaster afaic. Only tried it once, I had a cockpit FULL of mist as the spray tumbled in from the back. It got soo bad after about 30 mins, I could not see the dials as they were covered in water and unfortunatly, whilst the wipers were doing the best they could on the outside, they don't work on the inside of the car. The visibility was non existant, I had to keep wiping the screen with a towel. 😔 So for me. A half hood was definatly NOT a wet weather cover. No longer RED 2.0 HPC 230BHP here

not surethey do a solution for the front though ☹️

As we all know, we can get a 205 on a 8.5 rim. You can get yoko A048 in 225/50 15. they will fit a 9" rim, as that is what is fitted to my old mans Quattro sport, and those are the tyres he has fitted. They are not too stretched, infact they work very well.

WELD IT 😬 😬 *tongue* Sorry not helpful

Well my two penneth, I used to jack mine up on the rail Behind the crucifix. that has two diagonal braces comming down from the top rails of the chassis. My little brain worked out that the loads would be shared between the two welds at the end of the rail, Pulling the braze joints, and compressing the joints on the top rail.

Tim, you can get the SBD can to fit a standard collector. I took mine to a local fabricator, he cut the 1 pipe off of the 4 into 1 and welded the correct size outlet on. He needed to cut into the collector. It worked fine.

Paul, not wishing to bang on about what has been mentioned, but 4K plus revs off the line would have seen me sitting in a great pile of smoke in my Vx. I like dave used to use about 2.5 to 3K to get mine up and running.

I have force ale my six month old Rush carbon . Large frame. spec as follows. July 2008 rush carbon. With carbon lefty max 110. Size:- large Rear shock:- fox RPL Rims; mavic XM317 Hubs; rear dt swiss champion. front cannondale lefty. Crank; shimano slx Front mech; shimano XT Rear mech; shimano XT Shifters; shimano SLX Handlebars; FSA XC-282 AOS Brakes; Avid elixir R Saddle Fizik Nisene Seat post; Thompson Tyres; maxis madusa Price £1650.0 The frame is july 2008. the components are Brand new. Never ridden. I up graded from rush to a rize. all the bits on the rush which I had built up from scratch I transferred to the rize and all the stock parts from the rize I put onto the rush. As an indication a rush carbon frame set and carbon lefty retails at about £2500. this frame set in team colours. No longer RED 2.0 HPC 230BHP here

or with out cage just roll bar crash+head+ othercar body/floor/post/ tree/ kerb/ other solid object = death You crash one of these little cars, it's more luck than anything else if you walk away safely. Mind you , the same could be said of most convertable cars.

Might be a bit severe, but why not do what they do with new cars and fit transport blocks in the springs. Jack car up to require ride height insert a block and away to go.

I know it's not helping , but that looks a very tidy car for the money. You must be sorry to see her go. 😔

Bevan Funnel Dresser. MAde in Yew. Glass door cabinate to top. excellent condition.(As new) looking for £495 Pictures available This is the base unit, plus that is a glass doored cabinate on top.

Regin, YSHM.

Regin, I'll send the info tonight. Consider them sold.

Darren, I'll wait to see if we can sort regin out. If not there yours. I'll have the money when you are back. Have a good trip.

Jason. My mother in law lives in Warwick. There could be a plan hatched here..

RJ, I'm in Cardiff. I can store it untill the end of Jan.

I have for sale one of these. Like new. Used twice. No car to use them on any more.. Nice little chrismas present. No case. Would really need to be picked up. Looking for £300.00

So Brent, how do you know this??? I'll get my coat..

That's Ben Long old plate isn't it?? Best of luck with sale.

see here been done.

I wounder if this is a crossover from the motogp Bike? I stand to be corrected, but I belive When Rossi went to Yamaha in 2004 He requested the engive have a smoother power delivery, they went from a screamer to the 'two twin firing order' Which is why if you listen to the M1 it sounds totally different to all of the other moto gp bikes on the grid.

1 lb ft is simply the force acting on a bar 1ft long with 1lb hanging off it.