Andy Doughty
-
Posts
325 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Andy Doughty
-
Or sensible offers?
-
Top and bottom wishbone sets for a 1997 narrow track car. The bottom ball bearing on one side could do to be replaced as it has a little play in it. The paint finish is not that good particularly on the bottom wishbones so they need love. All bushes attached to the car are good and the top ball joints have no wear. The bottom shocker mounting bolts are in good condition as they have been copperslipped from new. £50 including postage in the UK
-
Fits onto the spare wheel and wheel carrier with strap. Selling as I don't have a wheel carrier after a hack saw attack 😬 Used very little and in excellent condition. CC charge £50 for new, £33 inc postage in the UK
-
John I'm running a standard bar at the moments but I can't imagine it won't fit? I'll mail you off line later as we are rushing off to the pub! Cheers Andy
-
And I'll have it if it fits a standard car
-
Hi Mark, I know it's a long time ago since you posted this but did you get this resolved ? I ask because mine has just failed in the same way and I am having difficulties getting through to Freestlye
-
Thanks I'll try them all Andy D
-
Does any one know ? Are there any other suppliers of the above as Caterham are stiil on back order after 6 weeks and I have a track day soon
-
Dave Angle drive arrived in post today Thanks Andy D -
Danny What's the diameter of the flywheel? How bad is it? and have you any idea of the run out. I guess there not much metal on a ultralight weight to machine off. Any idea how much you want for it as it will need to be reasonable as it will be a pain for it to warp aagin when in the car so there is a bit of a risk. It will be fitted to a MK 2 Escort with about 190 bhp Regards Andy
-
I have mailed again (hopefully)
-
Mal You have mail
-
I have passed this on to a friend of mine who thinks he may have a set of these. I'll let you know Andy D
-
I will have the speedo angle drive if Dave SL77 does not want it Regards Andy
-
Any Duratecs out there fitted w/ the retro ford water rail?
Andy Doughty replied to BBL's topic in TechTalk
My son has just bought an engine with one fitted and it look OK. The engine will be fitted into a MK2 Ford Escort. It has got sensor holes but no option to fit a thermostat which the raceline has. I used the standard thermostat housing in my 7 which has a Dratec and it worked fine. Regards Andy D -
Meths is also good
-
Lightweight flywheel, not the standard pig iron type!for a Duratec. Regards Andy Doughty
-
Type 9, with the close ratio gears, short input shaft and in good condition but may accept one in need of work. What have you got ?
-
It was fitted in a good old Nova race car so I am not sure. It may be advisable if you could ring Ian direct as he has it advertised on another Racing site Regards Andy
-
On behalf of my Son who has retired from 750 Stock Hatch Racing. Lightweight 5 point sabelt red harness, all 3inch straps apart from 2inch crutch strap . Bought new in 2005 . It is still valid till the end of 2010. In very good condition with aircraft quick release buckle. See page 163 top left in the new demond tweeks 08 motorsport book if you want to have a look at the spec in more detail. The crutch strap was an extra £70 plus post. Contact Ian on 07739 344142
-
Sorry Guys I have been away from a PC for a few days so could not reply. Tyrone I would prefer not to split but would if stuck. Roger Will mail you off line so we can talk it through as I may be able to get the bits into the SW London area at some point if you are not in a rush. Andy D
-
Thanks Nifty , I am sure your right on that. Roger In York, but do travel to Portsmouth (as I am tonight for the weekend)
-
Too expensive? any offers or is it to the scrap yard ☹️
-
Too expensive? any offers or is it to the scrap yard ☹️ Top and bottom wishbone sets for a 1997 narrow track car. The bottom ball bearings could do to be replaced as they have a little play in them. The paint finish is not that good particularly on the bottom wishbones so they need love. All bushes attached to the car are good and the top ball joints have no wear. The bottom shocker mounting bolts are in good condition as they have been copperslipped from new. Also a 10 mm anti roll bar that needs paint and orange rubber bobbins. Photos on request. £70 plus post which I guess will be around £10? Andy D Edited by - Andy Doughty on 29 Nov 2007 21:00:49
-
SM25 You have mail ref Duratec
