Dixa1225
-
Posts
184 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Dixa1225
-
Nothing to lose by putting a set of plugs in. That's what I would do to eliminate the possible cause.
-
Normal for a sigma engine.
-
These should have already been fitted. I would contact CC to sort.
-
https://caterhamparts.co.uk/fittings/7111-gearbox-mount-spacer.html?search_query=+3E0G0002A%29&results=1
-
I had the exact same fault with my new Brise. Andrew (Revilla) very kindly helped diagnose this issue. I returned the Brise & had the old one refurbished.
-
Has anyone ordered a 33-2036 K&N filter & if so did it fit? Thanks
-
#5 : You won't be able to get large pipe pliers in there. Not sufficient room on a Sigma
-
Normal thread , use one of these : https://www.sealey.co.uk/product/5637179438/oil-filter-claw-wrench-o65-110mm-capacity-38-12sq-drive . Not a lot of room on a Sigma engine car.
-
Caterham South are in Crawley not Croydon. Graham is based at Dartford.
-
How will carrying out this modification effect your CC warranty ?
-
Part number for the Genuine Ford Oil Filter is 1883037 .
-
My car has just passed IVA , handbrake cables fixed to A frame using P clips .
-
Nylon are fine for IVA
-
That is a bin . The kits come with that bolt in the chassis , telling you do not throw away.
-
Yes , Ford Sigma engine . Only caused a problem when hot , we think it was being caused by a failing internal seal in the slave cylinder. This was on a race car so not sure on mileage . Been fine since replaced.
-
Just had the same thing on a 270R , same symptoms cured by replacing concentric slave cylinder.
-
Many thanks Jim123
-
Can anyone please confirm this is still the correct link for a Sigma oil filter removal tool : http://www.ebay.co.uk/itm/271298525810
-
Hi All, Anyone thinking of doing the Goodwood sprint who has not already applied , just to let you know the event is now full. This was going to be my first sprint but I am only on a reserve list which is disappointing. Will still come along to spectate and gets some much needed tips . Regards Dean
-
Need a minium of 25 Litres on a Sigma . The pump needs to prime to be able scavenge and you need to cover the bowl to do that. After that you can run it from almost dry.
-
Hello, Is it a requirement for a Hans device for the Speed Champs ? Thanks in advance.
-
13" wheels and Toyo R888 tyres are a great combination, just the correct size on a Caterham in my opinion. They aren't going to improve your bump steer mind.Need to shim steering rack for that .
-
-
Are there 2 wires on the fan switch ? if so bridge the 2 wires , fan should then work. These duratec do run hot , 105c is at point when the fan should kick in.
-
PM Sent