Packers

So, success! Got the Sealey one and it was reasonably straight forward once I'd sworn a lot and removed the washer reservoir and then sworn some more. Oakmere Caterham clearly wanted the oil filter to not leak when they installed the last one. Torque to free it was daft Cheers for tips!

Cheers! My chain one has dug into the filter but i cant get enough rotation! thanks for the tip! Paul

Hi all I have a sigma car with an oil filter that is at present rectant to loosen. Theyre not left hand thread or anythign weird are they? Any tips on access to loosen? Trying with chain strap and no luck so far Ta!

Now sold

Hi all Selling the tillets that came with my car now as I prefer the S seats. Very good condition. Come complete with the factory set-up of runners for the drivers seat and fixed aluminium "subframe" for the passenger seat. Would be happy to wrap them if anyone is some distance away and needs to arrange for a courier to pick them up £695 ovno

Ive got my passenger tillet out and the fixed mounting has a hole pitch that is miles off that of the runner on the S Seats I've bought...

All Another question: what do you find is the best surface prep prior to touching up stonechips on a seven? Isopropyl Alcohol? Cheers

Im literally in the middle of doing this myself. Pitch of passenger seat tillet mounting holes is definitely substantially different to the runners on the S seats I've got second hand

Ta. Have got passenger seat out! Pitch of mounting holes for S Seat runners is of course different. Deep joy

Hi all Trying to get my Tillets out. Only one nut came out, without being held at the top, for the drivers front mounting. I've managed to get the other one out but do I pull the seat forward to get at the top of the rear ones? If so, anyone else have the problem that the adjuster lever fouls the chassis bar when the seat is set to the rear??? How the heck do you get it to come forward?!!!! Whats the process for the fixed passenger? Looks to have cap bolts inserted from underneath on that side Cheers all Paul

Hi all, Is there a specific car to order the oil filter against or is it just a case of getting the part number off the filter itself? My 310R is probably due a service even though its possibly done sub 200 miles since its official service mid 2019! Cheers

My paint seems to come off if you so much as breathe on the car!

Hi Got myself some wider neoprene tape and want to get the old stuff off. What's the best way to get the old tape off? I can get the faom off but the tape is still clinging on! Cheers Paul

Cheers. I think the foam at the rear is too far forward on the flange of the bulkead/scuttle too. It's a factory car but the bonnet appears to be contacting the metal behind the foam strip and actually sticking to the paint a little

Hi all Is there a knack to doing this to reduce the chance of paint chipping? Also any tweaks for protecting the paint on the edges of the bonnet pressing in general too? Thanks in advance! Paul