Thanks for the reply Alex. I have a Zetec fitted with a 7 inch silencer which is bigger than the one that was with the crossflow setup. This seems a lot of weight betwen the headers and the rear mount. I have seen cars with a front bracket and wondered if it was standard.
John.
I have a live axle chassis.I need to support the silencer at the front as well as the back, can anyone give the position on the extra exhaust mount hole that is under the skin at the front of the silencer? I am assuming that there is one there Dimensions from the front or the rear mudguard would be fine.
Regards, John.
Yes is the answer! You will need to remove the A frame bolt where it passes under the housing to allow the case to rotate. Dont forget to drain the oil before undoing all the diff nuts around the case.
Regards, John.
Not having the Mondeo manual, can anyone give information or links to cam belt change on a 2L Black top? Also best place to purchase kit.
Many thanks, John.
I have tried cleaning Michelles Meganne soft top with one of the market cleaners without much luck. I cant remember the make but it was a well known brand. I was still left with green moss type areas and a rather blotchy hood. Has anyone found a good way to bring this type of material back to a clean look.
Regards, John.
Nic, can you let me know if you still want the Knex as I need the space. As It is for a good cause you can have it for £30! There is loads of it. Just let me know either way.
Regards, John.
I have nearly two tea chests of Knex building kits, most hardly used and lots still in unopened bags together with nine of the orange boxes. Been sitting in my garage taking up space so £50 collected. There is over £300 worth of kit here enough for a small army of kids!
Near Heathfield E Sussex.
Regards, John.