Jump to content
Click here if you are having website access problems ×

John Gaines

Member
 View Profile  See their activity

  • Posts

    930

  • Joined

  • Last visited

 Content Type 

Everything posted by John Gaines

  1. John Gaines
    Dave, is this a four door? We have junior 2 arriving in april and we need some transport. Regards, John
  2. John Gaines
    If this is suitable for a 1 year old can I take it please? Thanks John.
  3. John Gaines
    BTT
  4. John Gaines
    I need to transport a cage from Leek Wootton, between Warwick & Kenilworth to the south east, preferably e sussex by september if possible Regards John
  5. John Gaines
    thanks Bill, seems a shame to cut up a good one as I only need half, so I will pass over to Stuart.
  6. John Gaines
    BTT just in case someone has damaged one this season 😳 John.
  7. John Gaines
    Can I have first dibs on the tax disc holder? Thanks, John
  8. John Gaines
    Vinnie, the part that I need is the front tube that connects to the chassis and over the wind screen, if possible with the two rear bars going back to the rear frame, but not the rear frame. This would be a rather large odd shaped parcel 😳 The front bar with the top tubes cut off about 30mm back would be ok. I am looking to fabricate an add on to my FIA bar, not for the track but for any deer etc round our country roads. The new bar would bolt on to the front of the chassis where the cage fits and clamp the FIA bar. Let me know if you have any ideas. Regards, John
  9. John Gaines
    BTT
  10. John Gaines
    Kevin, I contacted Bruce at Arch and it does not fit a live axle chassis, so pass on to you John.
  11. John Gaines
    If this will fit a '97 live axle can I have first dibs please John.
  12. John Gaines
    Bertie YHM. John.
  13. John Gaines
    No it is a '97 live axle.
  14. John Gaines
    I have a zetec in my seven and the fit will be close but it does go.Have you the correct gearbox to bellhousing spacer? I think Phil Walters web site has a lot of images IIRC. Are you putting in an alloy bellhousing? this is a major weight saving on the cast iron boat anchor thing I think rally design supplies them. Good luck, John Gaines
  15. John Gaines
    A bit of a long shot but I am looking for the front half of a cage for a project. I have a live axle car but as I only need the bar that runs from the dash over the screen a dedion one may fit. Regards, John.
  16. John Gaines
    That's no problem, mail me your number and we can sort out a time to pick up. Reards, John.
  17. John Gaines
    They are free . I could get them down to shoreham over the next two weeks if that helps? Regards, John.
  18. John Gaines
    From 1997 most copies present. Collect from Burwash Weald, East Sussex. Regards, John.
  19. John Gaines
    Mrs G has a new car and needs to sell her soft top. The car has full service history, dymanique (pearlescent silver). 84K new cam belt, eletric hood, Viper alloys recent tyres, Y plate. All documents etc. £3000. Photos available. Regards, John
  20. John Gaines
    I have a crane in Burwash Weald E Sussex available to club members. Engine stand as well
  21. John Gaines
    Thanks Tony forgot to add Zetec Regards, John.
  22. John Gaines
    As the title says. I am looking for a good condition Raceline wet sump. Thanks, John.
  23. John Gaines
    No problem, I have about 7 of the old ones and 6 of the new. Regards, John.
  24. John Gaines
    David, the 52a has a quick release lever and will be 30 years old, the 52 has no quick release but is not very old. New they are expensive! http://www.tooled-up.com/Product.asp?PID=8122&Referrer=Froogle
  25. John Gaines
    We have a number of record woodwork vices that are surplus to requirements, good quality. Model 52a old ones £8 Model 52 mew model £15 Best to collect or use GONADS can deliver to East sussex or Kent meetings John.
×
×
  • Create New...