Jump to content
Click here if you are having website access problems ×

Graham Howard

Member
 View Profile  See their activity

  • Posts

    474

  • Joined

  • Last visited

 Content Type 

Everything posted by Graham Howard

  1. Graham Howard
    I am sure everybody will join me in thanking Chris for doing such a fantastic job over the last few years. He has left very big boots to fill and that's why there are 3 of us! I hope we can continue to make the speed championship thrive when it eventually starts again. Hopefully we can have a few events towards the end of the season. Graham (New comp sec)
  2. Graham Howard
    Just had a last minute drop out. Anybody else want to join us?
  3. Graham Howard
    One place left now......anybody else want to get some pre season testing? Graham
  4. Graham Howard
    Yes Rob, I think we can make a space for you. Are you making a comeback? You are on the list and I will email you early March to ask for payment. Did you see the new regs on tyre pressures?
  5. Graham Howard
    Aled and Charlie There are still a few places at Blyton on April 8th if you want to join us there. Graham
  6. Graham Howard
    Alan, I will go halves on some class 3 tyres for David.....! Chris you have done a fantastic as Compsec and it really sad that you are leaving that position. I am sure you won't be able to keep away. Looking forward to seeing you and Matt during this season.
  7. Graham Howard
    Good idea nutty7, I will do that.
  8. Graham Howard
    Thanks Phil. The list is looking very small, only 7 of us confirmed so far. If you are thinking of joining please let me know as soon as possible as I really need to confirm the booking by the end of next week. If we don't get enough I will have to cancel.
  9. Graham Howard
    I have made a provisional booking with Blyton for a test day on 8th April. The format will as an open pit lane track day with a maximum of 6 cars on track at once. We will have the opportunity to change layouts between eastern an outer at lunch time if we want to. We really need a minimum of 20 cars to make the cost reasonable. They will take a maximum of 25 cars. The cost per car will be £138 if we have 20 participants down to £110.40 if we have 25. This is a great chance to test those winter mods with plenty of running. Please post here if you want to join us. Graham
  10. Graham Howard
    To access the bolts holding the cage you will need to remove the dampers. The top damper bolt is accessed at the corner of the bulkhead behind the seats. This will allow access the the bolts going up into the cage. On an imperial car these will have thin heads and you need to be careful to use a socket which fully engages. On a metric chassis there is more space and the bolt head is not thinned down. Make sure you get the right FIA bar for your chassis. A metric bar will fit an imperial chassis but not the other way round.
  11. Graham Howard
    And this is the moment that unusually made me the recipient of yellow trowel... Also thanks to the marshals for sweeping up after me and recovering my front wing which flew off in T1!
  12. Graham Howard
    Hi Roger I would echo the comments here, not worth spending that sort of money on a 1.6K. Why not put a wanted post in the marketplace section, a 1.8 with a standard head and the cams you already have would be just as good for competing with in class 2. Hope you get something sorted. Graham
  13. Graham Howard
    Congratulations Clive on winning in a very competitive year in Class 2.
  14. Graham Howard
    PM sent. Graham
  15. Graham Howard
    I have cap head bolts securing the front discs and am using a speed sensor picking up on those bolts without any problem. The sensor is positioned on the outside edge of the bolts so that it doesn't pass over the centre of the cap head.
  16. Graham Howard
    These have been taking up space in my garage for many years.... A pair of live axle top suspension arms and front anti-roll bar. Free for a donation to Race against Dementia.
  17. Graham Howard

    Springs

    Graham Howard posted a topic in For Sale

    Set of springs for Nitron dampers. Front :250lb/in, free length 8 ins. Rear 150lb/in Free length 10.5 ins. Good cosmetic condition, originally supplied by Nitron. £50 plus postage or collect from Milton Keynes area or I can bring to a speed event.
  18. Graham Howard
    Not familiar with the EU1 engine but that that cam timing seems extreme for a supersport. Shouldn't it be more like 60/45 thou? Graham
  19. Graham Howard
    It's yours Roger. I will email you towards the end of February asking for payment. Graham.
  20. Graham Howard
    Now 1 place available, please post here if you want to join us.
  21. Graham Howard
    Paul I used Northampton motorsport last year and they did a very thorough job. Definitely recommended. Graham
  22. Graham Howard
    Release bearing is SKF VKC 2144.
  23. Graham Howard
    It's yours Chris. More details nearer the date.
  24. Graham Howard
    Tony, you are in already, so the place is still available.
  25. Graham Howard
    I have booked Curborough for the 15th March so that 10 of us can get warmed up for the new season. 1 place left, please post here if you want to join us. Cost is £69.50 per car. Graham
×
×
  • Create New...