Jump to content
Click here if you are having website access problems ×

CaterBram

Account Inactive
 View Profile  See their activity

  • Posts

    2,323

  • Joined

  • Last visited

 Content Type 

Everything posted by CaterBram

  1. CaterBram
    how far are you stripping the axle, you don't need to strip the flange off to remove the half shafts from the axle ?
  2. CaterBram
    Just spotted Chris Gibbs has his car up for sale on Pistonheads if anyone is looking for a move to Class 4. Advert
  3. CaterBram
    Just got confirmation our entry has been sccepted :-)
  4. CaterBram
    I love epynt and have been every year I could, however this year i'm under orders as the better half has already made plans. For anyone who has not been to epynt, I've got to say it is an enjoyable weekend in the most unusual surroundings and is a great hill.
  5. CaterBram
    Me & Mat's entered....
  6. CaterBram
    The tires are 4 year old Falkens with approx 2mm tread, personnally i'd replace the tires for something new before using in anger.
  7. CaterBram
    flag stones, block paving and weeds not included
  8. CaterBram
    With tyres exactly as per the photo's
  9. CaterBram
    Yes still available. Collection from Barnsley or any sprint event except for Epynt.
  10. CaterBram
    Not sure if anyone else is camping, but were stopping at :- Chestnuts Campsite, Norwich Road , Fundenhall, Norfolk , NR16 1EG http://chestnutscampsite.co.uk/ 7 mins away from Hethel. just realised that it's a bank holiday weekend so we are going to stop over on Sunday night as well rather than tramping back home.
  11. CaterBram
    Mat Who On a serious note proud to bit's with Mat's driving, seems like the jump from a classic 40 BHP mini to a 140 BHP caterham is not too difficult I'll just have to turn down the boost & Nitros on Mat's setting
  12. CaterBram
    Competed at Goodwood this weekend, liked the feel of the new brake pedal, just found that myself braking two early and two hard, a few things to unlearn and relearn I think
  13. CaterBram
    All fitted & Working, only things i'd overlooked was :- Yolk attachment for top of brake pedal. T Piece to connect two front brake lines into the single outlet for the front brakes. Test drove and much better.
  14. CaterBram
    Thanks to BG Developments, a new uprated master cylinder is winging it's way to me on a Pre 10am delivery, after being collected from AP :-) A big thanks to Dave Fuller for his great customer service.
  15. CaterBram
    Mankee, that's spot on, reading through the other forums the body is the CP3627-101C and the complete unit with reservoir is CP4627-2PRM100 . The Marcus forum even points to a stockist. I've sent them an email and will see what comes back. Picked up one interesting fact which have never twigged before which i'll put down in case someone else finds it useful in future, the ports are marked P & S P is the prime circuit which is connected to the front S is the secondary circuit which is connected to the rears. on pressing the pedal the prime circuit operates first and then after closing a clearance gap the Secondary circuit operates.
  16. CaterBram
    Thanks mark, i'll give them a try.
  17. CaterBram
    I've done a drum to disc conversion on a live axle, with the increase in piston size on the disc brakes the brake pedal is deffinatly softer, I know the standard master cylinder is 5/8" and the updated 13/16" but I think the live axle is actually smaller than the current standard. It's not a case of replacing the seals as fundementally the current master cylinder is fine just under sized now. To move suffient oil to correctly operate the rear brakes i've got a longish soft pedal travel. By swapping to a upgraded master cylinder I should get a shorter, firmer pedal travel, I accept that to get the same braking force the affectivly I need to press harder,
  18. CaterBram
    So with both Caterham and redline being out of stock apparently since december what alternatives are available instead of the ap uprated brake master cylinder ?
  19. CaterBram
    Umm that would probably explain why Redline have not responded to my email request for an uprated master cylinder.
  20. CaterBram
    I'm running a test day for the South Yorkshire area tomorrow, unfortunately due to an accident today there's now a place spare. If your interested please drop me a line, and hopefully ease the sting from today.....
  21. CaterBram
    The L7C Competitors area infomation is from last year and may need adjustment. I'll ask for clarrification.
  22. CaterBram
    Mine & Matty's entry printed and in the post monday...
  23. CaterBram
    Roger, It's covered by a catch all... 5.20.5. Be prohibited from carrying cameras/videos unless authorised by the Chief Scrutineer and Event Organiser. Basically, unless the Chief Scrutineer is happy that the camera meets the guidance he is given you have no right to carry a camera...
  24. CaterBram
    Okay, Clarrification on security of mounts. i.e. not using suction cups.
  25. CaterBram
    Are you looking at Last years footage.......... Rule Change only came in this year,
×
×
  • Create New...