I'll be fitting a single diagonal roll bar in the coming days and understand I'll need to remove the top bolts from the shocks to fit the lower bolts. My question is (simple I'm sure) can I support the car on the chassis as I would to remove the wheels in order to fit the bolts and is there anything else I should be aware of? Many thanks in advance. Christian.
The seat pad has velcro fitted at the top and bottom edge. You stick self adhesive velcro to the underside of the leading edge of the seat and on the back and attach. I also have a section of Velcro fitted where the small of your back will be for extra security. Hope that's helpful?
I think you're probably right. After a bit of realignment mine are working fine. I think I'd managed to postion the drives a little too far to the right of the car pulling everything out - a simple fix, thankfully!
Thank you very much for the advice. Ive got them going now, it would seem something was preventing movement of the rack - potentially over tightening the nuts that hold the drives in place, oh well, the new switch I've ordered will look pretty!
2003 K-Series car. Having fitted a new dash the wipers are dead, nothing, not a sausage! I've checked the fuse (washers still working so that rules that out) the switch feels rough but does make its positions. I've read about a control box (upper left of fuse box) but my car doesn't have one that can cause trouble. I've checked all the connections and can find nothing wrong. I'm guessing its either the switch (I hope!) Or the motor? Anyone able to shed any light? Thank you.
Puma Replicat driving shoes in UK 10. These are pretty much in as new condition. I've only had them on a couple of times but they're just too small for me. £35 ONO plus postage.