Jump to content
Click here if you are having website access problems ×

Allen Payne

Member
 View Profile  See their activity

  • Posts

    1,295

  • Joined

  • Last visited

 Content Type 

Everything posted by Allen Payne

  1. Allen Payne
    There's also James Whiting up the M3 from Hook: Appletree Works, 26 - 30 Glenfield Road Ashford, Middlesex, TW15 1JL, Tel: 01784 - 241466
  2. Allen Payne
    Any idea how often the aircon need using to maintain the seals?
  3. Allen Payne
    Roger - here
  4. Allen Payne
    Moss Europe is not far from you and they do caliper rebuild kits for Spitfires (which I believe the brakes are from) http://www.moss-europe.co.uk/AboutMoss/ContactUs.aspx?#london
  5. Allen Payne
    Also worth checking that there's not a air leak anywhere else or the vacuum hose hasn't fallen off
  6. Allen Payne
    Also have these and very pleased with them. I believe they take the same brake pads as the early Caterham 4-pot AP calipers
  7. Allen Payne
    Use allen dot m dot payne @ gmail dot com
  8. Allen Payne
    I've two 6x13 Minator or Minilite style wheels for sale if you're interested. They could both do with refinishing as the lacquer is not great on either I'll need to send you some pictures to confirm they are the style you're looking for.
  9. Allen Payne
    Have you tired Halfords - I remember them having lots of sump plugs when I was looking for something a while ago.
  10. Allen Payne
    I've a pair of 6" x 13 silver 'minilite' wheels that are suitable as trackday wheels but not for a polisher if that's what you're looking for? If you're interested I can take some pictures.
  11. Allen Payne
    Thank for the offer, but with the help of a colleague at work and Rob Margel we're sorted out the logistics.
  12. Allen Payne
    Is anyone able to help get a gearbox from Twickenham or Camberley to Curborough this weekend for Malcolm Hickey to pick-up? Thanks Allen
  13. Allen Payne
    How long is the forward support? If it's about 11" then I have one, else I found the rear support Edited by - Allen Payne on 29 Jul 2013 17:46:44
  14. Allen Payne
    I might have one of these as well - I'll look tonight
  15. Allen Payne
    My (Omex?) shift lights caused a misfire when connected to the coil for their signal. Reconnected them to the tech feed they worked fine and the misfire went away
  16. Allen Payne
    Also check that the fan is running when the engine it hot
  17. Allen Payne
    YHM
  18. Allen Payne
    Roger If you need a spare gearbox I've a standard one that came out of my k-series (1400). I'll need to check it as it's been in a box for the last X years
  19. Allen Payne

    Shift lights

    Allen Payne replied to finmac's topic in For Sale

    I've a set of Omex sequential shift lights if you're interested. I'll have to find them to get you the model number, but they worked fine on a K-Series
  20. Allen Payne
    The wheels are like this one: here They will fit any Dedeion Caterham, such as yours, if they are wide enough for wet tyres I couldn't say. I've used then with 185x60x13 tyres.
  21. Allen Payne
    I've a set of silver Minilite style 6x13 wheels if you're interested. They have tyres, but they are far too worn to be of any use.
  22. Allen Payne
    I've an ali inlet manifold from a 1400, but it's not the supersport one but from a non-supersport - it has the inlet facing the rear of the car. I'm not sure if the bottom half of the manifold is the same or not.
  23. Allen Payne
    Ammo - I think you need to stop building engines again and write a book instead. I remember reading a book by Walter Hassan(?), who worked on Coventry climax & Jaguar V12 engines in the 50's & 60's, that was a great read - time for another one I think.
  24. Allen Payne
    I've a pair 13x6 Minilite style wheels (with worn out tyres) that you could have but their condition is not great as the lacquer has lifted in places. I can take some pictures tomorrow if interested.
  25. Allen Payne
    Yes, but they have a bracket held on by a knurled nut on the back of them to hold them in place. Getting that off and on may involve inverting yourself in the footwell
×
×
  • Create New...