jelley1970

Sorry just re read and spotted your location, bit far for me, i'm in Essex....

Hi there, interested in the slicks, what part of the country are you in? cheers Russ

Hi there, Turned out to be the map sensor, all is good in the world of Caterham again :) Cheers

Well, turned out to be the Map sensor, problem solved, hoorah... Thanks to everyone for your input. Cheers Russ

Hi John Many thanks for the help, I am at CC in Dartford as I type, and it's being Looked at so I'm hoping someone will be telling me shortly what the problem Is/was and that it's fixed. Keeping my fingers crossed. Will update shortly Cheers Russ

It was a private purchase in the end with no warranty, I normally use Taylors motorsport in Haverhill to look after my past Caterham's, but they are a bit of drive to get to, i'm at Brands on Wednesday so was hoping to try a few things to see if there is a simple fix. Cheers

Hi John, To be honest, I don't know if my wiring is okay or not, it seems to look alright at the tps end but I cant trace it to the other end, i'm not very good when it comes to the electrical side of things. I thought I would replace the coil towers as they are easy to do, but if i'm honest I don't think they are the problem. Is changing the TPS just a case of plugging in a new one or do they need to be set up? I don't suppose I could give you a call to discuss? Many thanks Russ

Hi all, Im having a few probs with hesitation etc as on my other post, was going to start by replacing the coil packs before I do the TPS, as I think they are easier to replace and go from there. Can anyone tell me what I need to buy and where I can get them from other than going to CC? I have a R500 Duractec. Many thanks Russ

Thanks for that, will have a look when I get home, will it be obvious If the wiring is knackered?

Thanks for the info, so do you think I can start buy Just changing the TPS, (the t piece plastics bit) sorry I'm not Very technical

Also can anyone post a link to where I can get one. I have a R500 Duratec. Many thanks

Yes, that what it's like hitting the limiter before its there, thanks for that, I couldn't put it In words. What do I need you look at, is there something I can do to check tps etc? Many thanks Russ

Hi all, Anyone got any ideas on the problem I'm having? I have a r500 duratec and at Snetterton yesterday the car was Hesitating at high revs, particularly in 5th, it seems to cut of and on Very quickly on a steady throttle when cornering and also A few times really cuts out / stalls half way through the revs. The trouble is its all bit intermittent, I had changed the plugs So not that, anyone else had anything similar???

I, 2nd the Yoko's A048, use both on road and track, wear very well and cheaper than the Avon's.

Hi, I'm running 263 burps r500, and have solid discs fitted And it stops on a pin, Cheers