Mowerman

Cheers for that....

Pair of Rear Wheel Arches in black....must be in good condition Cheers Kev

Still for sale...

JKM in Portsmouth www.jkm.org.uk

Now reduced to £1200.....If interested we could work something out.

1600 Supersport Engine Complete engine is soon to be removed from my 2001 Supersport.... This is a EU3 engine, covering 14000 miles with nothing but the best of TLC. less than a 1000 miles ago the head was removed, skimmed, ported, new standard sized in/out valves, new hydraulic followers, cambelt, gaskets etc were replaced. Remapped to 145BHP (Emerald not inc) on Rollin Road. Comes complete with Piper Verniers, QED TB's with 45mm Trumpets, flywheel,Clutch, starter, apollo (not fitted-winter job) Basically the whole engine, to drop staight in and go. Any questions feel free to ask! Looking for £1400

Cheers Dave Got them all apart...impact driver undid the bolts a piece of wee wee. Be in touch soon for some bits Cheers Kev

As part of the Winter Project, i'm converting a vvc head off an Elise to fit 285H cams, verniers etc...Started to take it apart, couple of questions...do i need a special tool to remove the Cam Shaft Timing Gear, are they left/right handed thread. If i do need a tool where does one aquire one. Any other top tips in this project will be appreciated....Cheers Kev

Hi Steve If you take your car down to my 'usuall' place in Pompey for servicing MOT, he will use comon sense to get the car through emissions, Dans went through the other week....

Paul Cheers for contact, wont let me e-mail you via link...Andy is first, waiting to hear back..then its Simon and then you. Cheers Kev

Andy I have a pair of leather seats with headrests out of a 2001 S3 car, in good condition, complete with runners and fixings, even chuck in a Softbits wind defector, hardly used, yours for £160

Just contact your insurance company, and they in turn contact the windscreen company....who contact you. Tell them what you want, ie S3 etc, black, silver and they will purchase it from Caterham, as they are the only supplier...the windscreen company 'may' want the old one...mine didn't

Dont Panic....its not in the Caterham, its in the transit! Expansion tank contains more oil than water...95% certain its the oil cooler,going to be changed... but how do i clean it out of the system...any top tips?

Good point Ian, disconnect battery! Heat sheild, i made out of 1.2mm ally, had abit in garage, but most probably get some from larger B&Q. Attach it to manifold bolts, dont undo them, but use another nut on the same stud, theres still plenty of room ish to fit it, all trial and error. Regarding the alternator connector, brothers is ok, why it hasnt melted we dont know, but mine wouldnt fit on, so i had to cut the connector off leaving enough wire to enable it to be connected again if need be, then use some small spade connectors, heat shrink attached it that way...so far they are still attached

Fitted 4-2-1 from Powerspeed last month...lovely bit of kit...seems a shame to fit It! The process went well, must admit car was up on a ramp, makes life abit easier, especially on the back. I used the same gasket as it was a metal one. If you have or can get hold of an air compressor, buy yourself a nibbler from Machine Mart, it's like a knife through butter! Cover area in white masking tape, couple of layers... I did make a rough template, by fitting the primary's to a spare engines, making a cardboard template and what ever primary fitted through the hole in the car, became the central point. Draw rough shape and nibble. Fit each primary as you go, do them up tight ish to get the correct position, once done finnish with file/fine emery. One snag...the first primary may hit/touch the connector to the alternator, so this had to be adapted. Secondly, fit a heat sheild it drys the starter out. Have fun!!

Hi I take it's Darren from the previous reply. Yes I'll have the trailer, is it worth a haggle on the price...got to try these days! Please phone 07808763230 Cheers kev

I'm interested...but where abouts in the world are you?

If your after the clear lens for the repeaters on the cycle wings, they're like rocking horse poo, but there is a pair for sale on e-bay.

Hi Steve Sent e-mail, hopefully you get it, but definately want a pair, and so does Big Dan. Cheers Kev

Thoughly recommend these guys....www.jkm.org.uk. Based in Portsmouth. Do a damn good job..servicing, MOT's and they having a rolling road for emerald.

Like you i painted mine before i aquired some genuine parts. Is it chrome or shiny ally? If its chrome doubtful whether it will take. If ally rub it down with wire wool and put Special Metal primer on it, leave to dry overnight and then spray with Hamerite Satin Black, but leave it a few hours between light coats. Dont paint it by brush it looks........not very nice! Take your time!