Jingers
-
Posts
104 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Jingers
-
1. What are the correct markings on a 2.0l Zetec suitable for 7 use and where they are on the block. 2. What year(s) for the engine. 3, Confirmation of cars they were placed in on the west side of the pond, ie - the Contour, Focus, Probe?? Etc. Jon Ingram
-
I've always used Castrol LM. see attched site for spec. http://www.mgocaccessories.co.uk/acatalog/MGOC_Accessories__Grease_176.html Jon Ingram
-
Dave, I cured the squeek on mine by placing cable ties around the rear springs suitably spaced and trimmed, no more squeeks. Expat
-
Nick, I have a 89 Live axle with 400lb springs at the front, ok for track. but for road springs I suggest around 275/300lb front, I find 115lb ok for the rears on the live axle road use(no bottoming out).
-
Alternatively fit tie raps around the coil of the spring at the points of contact = silence........ Expat
-
See my reply to Ade Ray's Topic, Wheel end float - Live axle. Expat
-
Ade, Likely cause of the clonk is the halfshaft moving through the inner race of the wheel bearing (this happened to my car), idea.gif Solutions-new halfshaft & bearing/pop down the breakers for used/shrink a sleeve behind the bearing race to stop movement or tack weld inner race to halfshaft. the choice is yours wink.gif good luck Expat
