Sandboy

Just the lsd, would benefit from a refresh by Road & Race, £150 delivered.

Work fine but have a bit of surface rust, £20 delivered.

In great condition, had very little use. £80 delivered.

Banzai Jeff! looked pretty spectacular from vantage point in queue but glad to see you hop out sharpish, hope damage not too bad. Another cracking weekend although curse of Harewood struck again and couldn't go quicker than t1

only an hour and a half for me so shouldn't need naps this weekend. hope to get on road mid-afternoon so target is to crack first one open before close of business.

That's the plan Tony and if weather has other ideas then it'll be the chippy in Wetherby. What time do you expect to get there?

and a garage place too, thanks Chris. Regards Graham

Thanks Chris, a place for me please. Regards Graham

He's not getting the trackday back if he does! Bring it on Chris. Harsh but fair Tony. Shaun, been trying too but trouble is so is everyone else!

Bugger - sorry, i mean the more the merrier!

- sorry, I meant that's a shame! Been watching your 2016 run and suspect your record is safe though. Gill, how dirty is your house anyway, have you been neglecting the chores - retire to a safe distance!

Trailer now sold, thanks for interest.

Hi Mark, yes, replied and photos emailed. Regards Graham

Thanks Paul, will get a couple of pictures over to you later, just let me know if need dimensions? Regards Graham

bttt

Low level tyre rack, tool box, manual winch, centre deck, heavy duty jockey wheel, aluminium box section ramps. Good condition, overhauled winter 15/16 including new pads, wheel bearings, damper, hitch and 8 ply tyres all round. £1000. Blatmail me for further info. or photo's

Wonderful news Oli, congratulations.

I'll take a place please, GrahamD

if there's still room at inn I'll have a place too please, thanks Chris.

Well worth the 808 mile round trip, beat satnav by an hour thanks to lack of Heddu interruptions this year, trailer stayed attached whole way too*redface* Thanks to those who provided advice and help with fuel leak, replacement o-rings ordered and greater finesse will be used on their installation.

Clive, not seen finals yet but did get an email from entries sec. Alun Morgan back in June to say entry accepted, might be worth checking with him.

I've got a couple of the old style hubs which keep as backups, you can borrow one until the replacements arrive from redline if that would help?

not a bad outcome but still not what you want to hear after been pounding it round somewhere like cadwell. was wary of removing even a few thou of material but figured was following chapman philosophy, off a bigger heavier vehicle and designed in days before FEA so a degree of over engineering at play, and touch wood has proved ok so far, crack tested each winter just in case though.

had similar issue where bearing had been run hot by previous owner, solved it by machining hub for slightly oversized race, only talking a few thou, added benefit that can purchase quality bearings, worked fine for several years now including sprinting.

if fuel in tank is above plug then will leak all the time. the black connector is an interference fit through plate which has pump fixed to back of it, plugs into connector inside tank on the pump, seals with grommet. to remove gently lever with blade of screwdriver under cable clamp at bottom of connector to break seal then continue to lever around base of plug to remove. plugs into connector inside tank on pump and tricky to reconnect, got to be careful to align connectors and not to dislodge one inside tank. if you do then will need to undo plate retaining screws and slide pump out to make connection then reinsert pump. not much room to play with but helps to remove long tank strap bolt to give better access. Tank out isn't that big a job and makes access a whole lot easier. Remember to drain tank.