davef
-
Posts
2,393 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by davef
-
Hi Paul, I have a1999 superlight chassis with V5 that I am looking to move on. This was repaired (new long front and all new panels) by Arch and then repainted in 2009 - it has been sat in the garage gathering dust ever since.... Let me know if you are interested - I can send some photos. I also have many other parts (almost enough to fully rebuild the car) - happy to list if you're interested. cheers, Dave
-
I saw the same or similar in Staines at lunchtime today, heading along London Rd towards the Iron Bridge. Dave
-
Coming off the M25 / A30 interchange towards Egham town centre, CA07RAM at about 18:15 today Dave
-
N11 RAE in Martins Heron at about 18:15 today...... Dave
-
At about 9am this morning, green 7 M3 southbound between J2 and J3. Dave
-
First was east bound @ about 11am, Green with Yellow nose cone, second was shortly after west bound - K10 *** - also seen parked up at Castle Combe. And then on the way back, C7 *** east bound. Dave Edited by - davef on 2 May 2011 22:34:05
-
as it says...
-
No thanks - I'd much prefer to keep the offering etc within the thread, and only take it to blatmail to exchange payment/delivery details. Much more open IMO, and seems to work well for other forums Dave
-
YHBM Dave
-
Pretty certain the pressure sensor is in the MEMs unit - the bit you have is I think the fuel vapour trap (see this thread here). dave
-
Peter, any chance of a photo - that may help to identify what you have and work out which diagram best matches. Dave
-
And the R400K is a VHPD with Roller TBs, MBE ECU and a different loom - if you think there are any other differences I'll be interested in knowing what they are. I realise mechanically the R500 is more exotic, but I think the engine loom is different to the standard EU2 k series, and the point I was making (obviously poorly ☹️ ) is that it is the same as the R400 loom. ETA - I guess the question is what does the OP have - an original VHPD on swan neck bodies, or a later roller barreled version.... Dave Edited by - davef on 22 Jun 2010 23:16:51
-
I'm not convinced the VHPD (R400, R500) engine loom is the same as standard EU2 K series engines - the ECUs are different for a start and I'm pretty sure they have different pinouts. Will check tonight. Dave
-
Thanks guys, looks like the photos cover what I need at the moment Shad, Simon, thanks for the offer - I think I'm sorted now. Cheers, Dave
-
Ah, good question! It's a 1999 Superlight. I'll have a look through your photos when I'm back home - I suspect the basics will be similar. Thanks Dave
-
As I'm finally starting the rebuild of my Caterham, I decided to have a look at the photos I took during the strip down, and can't find all of them ☹️ So if anyone has some rebuild photos that they're willing to share, or know of websites with a good set of photos, especially of the engine bay showing how the various pipes and the wiring loom go round, I'd appreciate any links In the meantime I'll continue looking for the missing memory card...... Thanks Dave
-
Hi, I'll take the DeDion tube assuming it's straight.... Ta Dave
-
Spotted going down Station Hill at about 5:45pm. Dave
-
Hi Steve. YHBM Dave
-
Heading north past Coral Reef on the A322 at about 11:15 this morning Dave
-
At about 9:30 in the Shell garage on Bagshot Rd, an older red Seven with clams..... Dave
-
It's an old article covered several times here - searching techtalk for the original author's name will find some of the previous threads and opinions on the article... Dave
-
at about 6pm, near the town centre heading towards the Met office roundabout...... Dave
-
On the M4/A404(M) roundabout at about 11:30 this morning - had the hood up !! Dave
-
I've not tried the fire blanket trick. My more recent repacks have used the stuff I bought as part of Mark's bulk buy - last that appears to be lasting well Dave
