davef

Hi Paul, I have a1999 superlight chassis with V5 that I am looking to move on. This was repaired (new long front and all new panels) by Arch and then repainted in 2009 - it has been sat in the garage gathering dust ever since.... Let me know if you are interested - I can send some photos. I also have many other parts (almost enough to fully rebuild the car) - happy to list if you're interested. cheers, Dave

I saw the same or similar in Staines at lunchtime today, heading along London Rd towards the Iron Bridge. Dave

Coming off the M25 / A30 interchange towards Egham town centre, CA07RAM at about 18:15 today Dave

N11 RAE in Martins Heron at about 18:15 today...... Dave

At about 9am this morning, green 7 M3 southbound between J2 and J3. Dave

First was east bound @ about 11am, Green with Yellow nose cone, second was shortly after west bound - K10 *** - also seen parked up at Castle Combe. And then on the way back, C7 *** east bound. Dave Edited by - davef on 2 May 2011 22:34:05

as it says...

No thanks - I'd much prefer to keep the offering etc within the thread, and only take it to blatmail to exchange payment/delivery details. Much more open IMO, and seems to work well for other forums Dave

YHBM Dave

Pretty certain the pressure sensor is in the MEMs unit - the bit you have is I think the fuel vapour trap (see this thread here). dave

Peter, any chance of a photo - that may help to identify what you have and work out which diagram best matches. Dave

And the R400K is a VHPD with Roller TBs, MBE ECU and a different loom - if you think there are any other differences I'll be interested in knowing what they are. I realise mechanically the R500 is more exotic, but I think the engine loom is different to the standard EU2 k series, and the point I was making (obviously poorly ☹️ ) is that it is the same as the R400 loom. ETA - I guess the question is what does the OP have - an original VHPD on swan neck bodies, or a later roller barreled version.... Dave Edited by - davef on 22 Jun 2010 23:16:51

I'm not convinced the VHPD (R400, R500) engine loom is the same as standard EU2 K series engines - the ECUs are different for a start and I'm pretty sure they have different pinouts. Will check tonight. Dave

Thanks guys, looks like the photos cover what I need at the moment Shad, Simon, thanks for the offer - I think I'm sorted now. Cheers, Dave

Ah, good question! It's a 1999 Superlight. I'll have a look through your photos when I'm back home - I suspect the basics will be similar. Thanks Dave