moosetestbestanden

CC is selling several rear brake items: A "Race" caliper, here And a vented disc, here Clearly there is weight savings but is there any increase in braking performance compared to the standard 'uprated' brakes? Iow, are they worth the dough? 2ndly, I'm changing pads. Topic has been covered to death but just the same I'm soliciting opinions on the ultimate performance pads for track use. I've got the AP 'Caterham' badged 4 pot calipers up front and the uprated calipers at the rear. I've had some issues w/ the rears locking and I'd love to see that go w/out installing a balancing valve (even though I probably should). The car sees very little duty on the road so no reason to compromise. Cheers! ------- Chris A verbis ad cursus

How will you handle the seat harnesses? Photo indicates that you'll lay them over the top, perhaps after trimming the seat edge. Edit: Can it be easily cut? ------- Chris A verbis ad cursus Edited by - moosetestbestanden on 20 Oct 2009 02:38:37

A single plenum chamber? I haven't ever seen the R400 so I don't know what Caterham do to get 210 hp but in the early days of Duratec that meant TBs & cams. Theoretically (if nothing inside is broken / bent) you should be able to transfer all the good bits (intake system, cams, sump, lightweight clutch / flywheel if it has them, etc.) to a donor and away you go. I did this when I popped an oil ring - a low mileage junkyar... er, reclaiming yard engine cost me $750. I moved all of the good parts from the smoker to the new. It fired up 1st try, no remapping required, and runs essentially identically to the original (knock wood). You may want to switch to an 80 deg. C thermostat while you're at it. 😬 Or, go see Ammo for even more fun ------- Chris A verbis ad cursus

Caterham posts the build manual here An older one is here ------- Chris A verbis ad cursus Edited by - moosetestbestanden on 24 Jan 2009 17:54:47

There have been several recantings on this board of right proper blow-ups of propshaft U joints which *possibly* are a result of shock loading from sequentials. Anecdotal evidence perhaps but for sure the results are not pretty. I'll be making mine the H pattern variety. ------- Chris Ad majorem 7 gloriam

I recently re-mounted a set of ACB10s on wheels after about 2 years sitting in the dark in a shed attached to my garage. I'd put them in opaque garden bags. The tires are somewhere around 3 - 4 years old. They don't seem to have suffered at all in terms of grip, or in any other way for that matter. ------- Chris Ad majorem 7 gloriam

A reasonable article on the topic can be found here ------- Chris Ad majorem 7 gloriam

I was just going to ask that question. Thanks ------- Chris Ad majorem 7 gloriam

I was pondering this over a smoke in the garage Sunday night. Do it in Titaniium. A bitch to weld but no corrosion, no fatigue, light & ductile. I reckon one wouldn't cost much more than a million or so ------- Chris Ad majorem 7 gloriam

Ammo, what's the diameter of the primaries and Rob's intake? May I have one? 😬 ------- Chris Ad majorem 7 gloriam

Tom in NorCal documented his build pretty well. It's all posted here It's a 2 liter in a S3 chassis. Cheers ------- Chris Ad majorem 7 gloriam

Thanks for that Paul. I'll pass the info about the strengthening along to Jon. As long as he's got to do some work he might as well do it all. He's had nothing but trouble this year. W/ CC now offering a high HP engine w/ a sequential option, I wonder if they've thought about this mode of failure. After all, the new R500 is little different than Jon's 250 +/- hp. Add some slicks and one would be in the same arena. Edit: A Norcal shop shows a hoop on their website and I believe they installed them in their race cars. I don't think they were ever, um, tested however. ------- Chris Ad majorem 7 gloriam Edited by - moosetestbestanden on 11 Jun 2008 01:44:44

Ha! 😬 No, it's the mount for the remote shock thingies. Suffered a bit it did. All apologies about the login thing - I don't get it and I'll ask Magnus why. Thanks for the help Mav! Roger: Jon said it was new, replaced prior to the start of the year. It had only done only 4 or 5 track events, perhaps a grand total of 100 minutes. Jon usually only hops on track long enough to get a good time - 3 or 4 laps per session most, sometimes less. This seems shock-load related & Jon has mentioned to me that he still isn't perfect w/ the sequential. Magnus theory that the drivetrain is essentially a direct connection between engine and tires seems plausible. How are sequentials implemented in your neck of the woods? Edit: Roger, you and Barbara have fun over there in France. We sorely wish we would have been able to join you. Work and events precluded that - bah. ------- Chris Ad majorem 7 gloriam Edited by - moosetestbestanden on 10 Jun 2008 16:09:31

I don't think registration is required. Drill down to the 'more replies below current depth' and you'll see on the list 'Well, as promised see...' posted by me. Then click on the attachments listed below the posting. ------- Chris Ad majorem 7 gloriam

Anybody interested in a fairly clear example of what happens when the front U-joint in the driveshaft fails at speed is welcomed to have a look here Opinions, especially from those who run or have experience w/ Quaife sequentials, are gladly welcomed, either here or there. Thanks! ------- Chris Ad majorem 7 gloriam