Jump to content
Click here if you are having website access problems ×

DirtBuddha

Member
  • Posts

    300
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by DirtBuddha

  1. Ooops - sorry, I misread your post... thought I'd read ZZS not ZZR. Apologies. Anyway, let me know if interested in the 6+8" wheels.
  2. Hi, I have going spare. Avon ZZS in 185/55R13 front and 215/55R13 rear. 4mm tread on the fronts, and 5mm on the rears. I believe 5mm tread is what they come with new from the factory. £285 located near Horsham, West Sussex Can come with a set of Caterham 8 spokes in 6 + 8" which are in perfect condition for £795, or alloys for sale separately for £550
  3. #4 did they (or can they) refinish the springs as well, or is it just a damper service Bilstein do? I ask, because my springs are a bit rusty.
  4. From memory its 32mm (ish) but as SM25T says, just measure it and buy on eBay.
  5. Just a note on Apollo vs Dry Sump: To the best of my knowledge, an Apollo tank is not a dry sump, its an air/oil separator. It doesn't pump oil under pressure to the engine, therefore wont help with oil surge on track. It's not the same thing at all. Happy to be corrected, but that's my understanding anyway.
  6. Shortshift: I have a 3.14 Ford diff for sale... but it comes with a Caterham Seven with Hayabusa engine so may be a little more than you're looking to spend
  7. @Neil220 Can you post a link to the website you mention pls? I'm interested to identify which version my 1.6 K Series is...
  8. Why not just find a lowish mileage 1.8 K Series engine and swap it out? That would be a lot easier than trying to mate a bunch of incompatible components...
  9. Depending upon whether I can get my Roadsport cage to fit my car, I may be selling the Safety Devices cage that's on my 1989 Imperial chassis car, £350. As in picture. BM me if interested...
  10. I have a Minno Max with GT Cover (not shuttle) if any good? Extra long 2.5m ramps for low cars like Caterhams, jerry can storage box, high level tyre rack, new hitch, locks, truly excellent condition with absolutely zero rust, and 5 brand new tyres. BM me if interested, can send lots of pics.
  11. I too have pondered self tapping screws, but M3 sized Allen head bolts with copper slip into rivnuts should not seize over time. They're not structural, aren't holding two critical items together and therefore don't need to be done up too tight. Also, if you remove the bolts holding the steering column clamp in place you can simply lift out the flat sheet of aluminium that is the bulkhead to gain greater access.
  12. DirtBuddha

    Cycle wings

    Can you post up the instructions from the current build guide pls as I have to do this job next week.. thanks.
  13. I have a set of four 6x13 KN 8 spokes with CR500's I will shortly be advertising. The wheels are black and in good condition but could do with a refurb. The theyre are old but in very good condition. £400 for the set, will not split. PM me if interested.
  14. I quite fancy giving it a go in 2023... can anyone advise what the costs are please? (I've searched but cannot see the entry fees anywhere). RS license - £160 Series registration fee - ? Medical tests, etc - ? Each round entry fee - ? (for rounds that cover 2 days ie Sat/Sun does this cost double?) anything else - ?
  15. Ah, sorry. Just a single I'm afraid.
  16. I found it, see pictures below. £50 plus postage
×
×
  • Create New...