Frosty

*** NOW SOLD ***

Hi John, PM sent.

Hi John, It’s awful timing as I’m currently overseas until Sat 28 Oct. If you’re happy to wait until I’m back then I can get them out of storage for you.

Hi, Yes these are still available.

Excellent condition all round. Fitted with Avon ZZR tyres with limited tread remaining (see pictures) located in Bicester, Oxfordshire. £750

Hi all, I'm looking to replace one of my wheels and I need the following: One 8" x 13" 8 spoke (rear) I'm based in Oxfordshire and willing to travel to collect. I would take a full set if available and I have cash. I will also consider any condition / colour as long as they aren't beyond refurbishment. Regards,

Hi Keith, I'm interested in this... I'm in Oxfordshire, whereabouts in Notts are you?

The CC supplied Draper tool kit is often on sale, over 40% off last year, at that price I’d say it was reasonable value. I’ve used it a fair amount and so far I have no complaints.

Mike, Will this crank a 2.0l Duratec alright? If so I'll take it off you.

Hey, that wiring in your picture is the immobiliser antenna. It senses the fob then lets you start the engine. That looks ok, however some cars have had an intermittent problem similar to what you have described... it was caused by the immobiliser box vibrating with engine revs and cutting power/electrics. Have a look under the dash for a small black box and see if it’s a bit loose or cuts the power when you tap or move it.

Hi Jonathan, Please can I order 2 x cannister and 2 x black roll.

Cheers for the reply John, thanks for confirming that this is the correct part... The cynic in me thought that the last person to fit this one just pulled something that fitted out of the parts bin. On a related note, I’m interested in braided fuel hose options, but not sure if there are any kits available. My R500 has a T-piece fitted on the end of the tank hose to a fuel pressure regulator on one side, then the fuel filter on the other. All the braided fuel hoses I’ve seen are a single line that would run from the tank directly to the filter, so I guess this wouldn’t be suitable. Are these only available for race bag tanks?

Hi all, can anyone confirm which fuel filter I need for a 2009 R500 Duratec? I’m going to replace some fluids and filters before the Spring/Summer. This is what I’ve taken off the car today but I think it might be from a rover engined car, it appears to be a MANN fuel filter part number: WK612/2

Ah ok, thanks for clarifying. I suspect it’s not a known problem with the Duratec powered cars.

Thanks for the quick reply, I’ll try and work out what the cost would be just to get my headers done, as I don’t mind the polished bypass pipe and muffler (which aren’t that much of a pain to polish using Autosol metal polish). Another question though; what’s “K click”?