Jump to content
Click here if you are having website access problems ×

Andrew Willcox

Member
 View Profile  See their activity

  • Posts

    110

  • Joined

  • Last visited

 Content Type 

Everything posted by Andrew Willcox

  1. Andrew Willcox
    Thanks both… I think I know someone who can help out with fabricating some spacers as you suggest. Would still take a BJ spacer if anyone has one available.
  2. Andrew Willcox
    Long shot… but does anyone have a spare 50mm spacer to raise the hitch from the frame on a Brian James Minno trailer?
  3. Andrew Willcox
    Simon, thanks that looks like the part! So looks like my clutch was upgraded to Westfield standard…
  4. Andrew Willcox
    Can anyone offer some guidance here - looking to replace the clutch arm pivot in my Type 9 gearbox housing after rebuild but the part supplied by redline and available on the Caterham Parts / Burton Power websites are a different design. The replacement parts supplied don’t appear interchangeable as it is a different diameter, the current one also appears a better design if I can source. I assume mine is worn and needs replacing, can anyone point me in the direction?
  5. Andrew Willcox
    Matthew, sounds just what I’m after, will PM you.
  6. Andrew Willcox
    Just discovered the plastic cap on my starter solenoid is cracked with copper terminals showing. From past threads it looks like the solenoid can be replaced, any recommendations on where to source one from? Alternatively, any recommendations on auto electricians in the Worcester area that could service? Also interested if anyone has a spare solenoid or starter on the shelf I could buy. Thanks!
  7. Andrew Willcox
    Problem solved! Drive shaft out and ring comes off with a few hammer taps. No heat or grinder required! Not vet offer things work out easier than expected!
  8. Andrew Willcox
    Problem solved! Drive shaft out and ring comes off with a few hammer taps. No heat or grinder required! Not vet offer things work out easier than expected!
  9. Andrew Willcox
    Just fitted a new RH driveshaft which has a reluctor ring fitted - old one didn't. Problem is the reluctor ring fouls the mount for the rear ARB. Any tips on how to remove the reluctor ring or other work around?
  10. Andrew Willcox
    Hi, trying to make my mind up on an LSD, lots of good info on this thread regarding SPC and Titan. Have talked to Steve @ SPC and understand the merits of SPC and understand the fit and forget economics - but I'm still struggling to justify the cost! One option I've got is a used ZF in a Sierra housing from a Caterham... can anyone comment on how a ZF compares to a Sintered Titan in terms of noise and durability? I think Steve said his diff was based on a ZF design... Andrew
  11. Andrew Willcox
    That would make sense... I was going to consider an LED upgrade as a second step after confirming I wanted to stick with smaller lights. I don't see the bowls on the SVC website - is that by special request?
  12. Andrew Willcox
    Chrome preferred, anything considered. I can arrange to collect if in the Midlands area to avoid need to pack and ship.
  13. Andrew Willcox
    Hi Dave, is the LSD a BMW or Sierra fit? I believe they are different, I need Sierra...
  14. Andrew Willcox
    Thanks Ged, I'm going to hold out for some Aces lights, please feel free to follow up with DanRo.
  15. Andrew Willcox
    Yes I've looked at them, but I think the ACES would be a tidier installation if I can find some. Have you got experience of DRE?
  16. Andrew Willcox
    Has anyone got a set of shiftlights surplus to requirements? Aces preferred. Need to be good working order - but not worried about cosmetic imperfections! Please message me if you have anything suitable. Thanks
  17. Andrew Willcox
    I've got a set of 6" wheels with Yokohama A539 tyres. I live near Evesham if that's convenient to you, PM me if interested.
  18. Andrew Willcox
    I've got a set of 6" wheels with Yokohama A539 tyres. I live near Evesham if that's convenient to you, PM me if interested.
  19. Andrew Willcox
    Loft Find - Boxed, unused set of Moprod MBS13 brake shoes. Fit includes Lotus Super 7, Rear 1963-67 Currently listed on eBay @ £15 + Postage if interested. Feel free to message me if you don't have an ebay account.
  20. Andrew Willcox
    Loft Find - Boxed, unused set of Moprod MBS13 brake shoes. Fit includes Lotus Super 7, Rear 1963-67 Currently listed on eBay @ £15 + Postage if interested. Feel free to message me if you don't have an ebay account.
  21. Andrew Willcox
    Does anyone have a spare cam cover for an EU3 K series engine? Threads gone in the coil and cover mounts on mine, seeing if there is anything out there before I resort to helicoils...
  22. Andrew Willcox
    Does anyone have a spare cam cover for an EU3 K series engine? Threads gone in the coil and cover mounts on mine, seeing if there is anything out there before I resort to helicoils...
  23. Andrew Willcox
    Does anyone have a spare cam cover for an EU3 K series engine? Threads gone in the coil and cover mounts on mine, seeing if there is anything out there before I resort to helicoils...
  24. Andrew Willcox
    Does anyone have a spare cam cover for an EU3 K series engine? Threads gone in the coil and cover mounts on mine, seeing if there is anything out there before I resort to helicoils...
  25. Andrew Willcox
    Tom, thanks for the offer but I'm limited to List 1B tyres. Looking like I will see how the Yokohama 539s go on Saturday and then see where performance and weather takes me on Sunday.
×
×
  • Create New...