Dave connors

I am after a 13 x 6 8 spoke anthracite wheel to use as a spare if anyone has one knocking around. Dave

I'm after a couple of parts for a spare wheel carrier for S3 metric chassis Spare wheel bolt and spacer sleeve Caterham part number 77323A Spare wheel fixing boss Caterham part number 76310 Regards Dave

Hi We are over here for a few days going back Friday drove the tt course today. Dave

A sbfs short shower cap the photo shows it fitted to a S3 with the FAI roll bar not sure if it was made for this but seems to fit OK. £60 plus postage if required

Spoken to redline and it should be fitted with the smaller master cylinder so I've ordered one of those not sure why they went to the smaller bore

Anyone know the best place to get a seal repair kit for the .7" clutch master cylinder (Girling 64676310) 2011 sigma engined car.

Yes fixed cam

That's the bolt that fitted ny 2011sigma 2035528 part number

The ford bolt number is 2035528 I have a spare if you are struggling to get one, if I remember correctly there are 2 different sizes fitted to the sigma engine

Hi I'll take this please

I think 36E306A is the part you are after on the Caterham site

I must have a one off switch can't sand anything off as all the other keys I've bought are too small on the locating diameter the graystones key is the same 1mm too small looks like replacing the whole switch

Is there everything I need to use them included

PM sent

I've bought a few from different suppliers non are this size, the original switch was from demon tweeks so a decent supplier but they were unable to help looks like a new switch if I want a spare key.