gulf 1
-
Posts
223 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by gulf 1
-
Refund received thanks Simon
-
6 Point Harness and Lowered Floor - Caterham supplied spacer?
gulf 1 replied to brianjhall31's topic in TechTalk
I too did this job 2 days ago. I fitted the spacer on the lowered floor then the stepped spacer on top with the wavey washer on it along with the belt mount then slid it all under the bracket on the rear bulkhead and fed the bolt up from under the car then fitted the plain washer and lock but. I figured the nearer the belt mount to the bulkhead bracket the stronger it would be. Simples. -
Shouldn't the kill switch kill everything ?
-
This looks like a good move to smarten up milky carbon fibre wings.
-
Hi Mark See the post above#15 that's the type I have works perfectly ,have got a carpeted block on the lifting plate so it clears my front numberplate and also gives a couple of extra inches lift,for trackdays it's so quick to lift the car for wheel changes. Dave
-
Hi Mark See the post above#15 that's the type I have works perfectly ,have got a carpeted block on the lifting plate so it clears my front numberplate and also gives a couple of extra inches lift,for trackdays it's so quick to lift the car for wheel changes. Dave
-
Hi Aeroscreens Yes the jack I bought second hand was from you with the block of wood and "new"carpet fitted.Works brilliantly no more pushing the car onto planks of wood etc. definitely worth its weight in gold. Thanks Dave
-
Hi Mark Would a quick lift Jack work.I got a second hand one best thing I have ever bought,excellent at home invaluable on trackdays.
-
I think I will try a 33-2036 as ChrisC has suggested. Thanks for all the Input much appreciated. Dave
-
I am going to replace the paper air filter element on my 2015 2.0 Litre Duratec 360 R .Can anyone tell me the number for the K&N equivalent and the cheapest place to order one from. Dave
-
I thought to anneal copper you heat it to cherry red then quench.
-
My carbon fibre cycle wings are looking a bit faded with water mark's etc. I was wondering if anyone had explored the possibility of having graphic film applied .I would like to know how it would stand up to the elements and whether it would be better than my current wings which mark every time it rains.Cost would also obviously be a factor.
-
Spotted an Ally Caterham with black nose cone in a line of traffic going South on the A92 from John O,Groats.Top bloke it was raining and 50 mph winds.Will forgive you having a good on.
-
I grease my droplinks on a regular basis, no knocking from them but there is a slight movement in them until regreased.
-
I grease my droplinks on a regular basis, no knocking from them but there is a slight movement in them until regreased.
-
The zetec one I have ordered uses a rubber seal, that's why I have also ordered 10 spare seals.
-
Ford zetec sump plug and 10 washers ordered from SmartEarlyBird for the princely sum of £7 30p. Thanks everyone for your help.
-
Does anyone know what the sump plug is from on a Duratec with wet sump. Caterham do not list it and I expect it would be a extortionate price anyhow.
-
Does anyone know where to get a wilwood clutch master cylinder cap seal for a 2015 supersport R ( Duratec).Caterham only seem to sell the whole cap for £22.20p.
-
No diff whine in my 2015 Supersport R with BMW diff.No idea what oil is in it.
-
Thanks for that.
-
Have just signed up to the My Route App and I must say I am impressed.As an oldie I am not too good with technology so for me to be able to export a route to my Garmin is a major acheivement. I have tried in the past with different systems but never had any success. I have question however,I have put the 2018 Fish &Chip run onto my satnav, If I use it from the start in Chepstow when I get to Aberdovey can I use it in reverse to come back to Chepstow ?
-
The forward mounting bolt on my radius arms seems to loosen after a few Tds
-
now sorted Thanks