Jump to content
Click here if you are having website access problems ×

mark_w

Member
 View Profile  See their activity

  • Posts

    239

  • Joined

  • Last visited

 Content Type 

Everything posted by mark_w

  1. mark_w
    Ordering some more materials this week so week or two should be ready
  2. mark_w
    Yes I do. Will send you a pm with the details
  3. mark_w

    Blue. R1 WOW

    mark_w replied to mark_w's topic in Spotted

    Hello Alan, will look out for you on my travels
  4. mark_w

    Blue. R1 WOW

    mark_w posted a topic in Spotted

    In Upminster parked on driveway Tues 5pm. Not seen before in the area
  5. mark_w
    Thanks Stephen really appreciate your recommendation cheers Mark
  6. mark_w
    got a new batch done now so if of interest please let me know
  7. mark_w
    My car had a race paddle clutch fitted when I bought it. And they're not something I would recommend for touring or driving in stop start traffic as they are very on or off .
  8. mark_w
    When my AP clutch and plate started slipping not long (enough) after having it fitted, I went for the helix plate and cover and has been good so far, mainly chose helix on the findings and recommendations of this thread here
  9. mark_w
    I've had problems with the thin (brown yellow) alternator wire , lots of heat down there and wire gets brittle and has broken shows those symptoms before becoming a non starter. going to rewire mine now.
  10. mark_w
    Reverie silverstone air box similar to the bernard scouse one here grp or carbon
  11. mark_w
    these were used on a 2001 car as set of wet weather hill climb wheels pcd 4 1/4" (108mm) 2 x 13" x 5.5" 2 x 13" x 6" bare aluminium , tyres very old and need to go, i can get these removed shipping at cost need to check £ £100 in Essex
  12. mark_w
    any damaged repairable ones out there?
  13. mark_w
    #20 will do, thanks
  14. mark_w
    Overtook me towing horse trailer ..left the M25 at junction 4 I think about 11.30 red black centre stripe KX69 ### anyone on here?
  15. mark_w
    #18 good to hear, i maybe need to just increase the cutout for the weld a little bit in future
  16. mark_w
    All gone for now, but will have some more in around 3 weeks
  17. mark_w
    #12 that looks good Rob thanks for posting the pic #11 :-) good to hear it's arrived safely #10 yes the handle dia will be ok. pm sent
  18. mark_w
    think its glued on some how, mine took a bit of removing with brute force (mole grips) then scraped / sanded the remaining glue off, the limiting factor on the length is underneath the diameter where the gaitor is it drops away at an angle. measure from there to the front of the grip, see what you've got
  19. mark_w
    (reply to 5 )Will they fit a metric chassis S3 ? I think they should fit all handbrakes but have only fitted to my 2001 imperial chassis, what i will say is if there are any issues I will sort them so your not left without That goes for anyone who buys one Mark
  20. mark_w
    I'm on the look out for an S3 carbon nose cone, prefer unpainted genuine Caterham but will consider whatever is on offer ( damaged , painted, etc ) Cheers Mark
  21. mark_w
    Have made a small batch of these while I was making one for myself, they are 30mm dia 120mm long , diagonal style weave, 2 different style anodised aluminium ends with 2x M5 grub screw fixing. I have tried to simplify the fitting by machining out a bit of clearance for the weld that is found under the handle once the grip is removed. cost is £60 inc postage,
  22. mark_w
    is this the one http://lowflying.lotus7.club/2011/2011_01_08_DrySump.pdf
  23. mark_w
    I have just come across a 2015 calendar if you are interested I will send in the post
  24. mark_w

    Avon ZZR 13" Tyres

    mark_w replied to jpath8's topic in For Sale

    What area are you?
  25. mark_w
    Yes please, thanks for doing another batch...Mark
×
×
  • Create New...