Jump to content
Click here if you are having website access problems ×

A7 OOH

Account Inactive
  • Posts

    520
  • Joined

  • Last visited

Posts posted by A7 OOH

  1. I need to replace the lower wishbone bushes on a 94 Classic SE. Understand these to be Y9 bushes.

    What is the easiest sequence to do this job with the minimum of stripping down.

    The anti roll bar bushes also need replacing but this is straight forward again Y9 bushes. 

    Gordon

  2. Thanks Orangepeel 61 it is as you describe only I have few white cables.

    The +ve terminal three white wires (two crimped as one plus an additional white.

    The -ve terminal has two white and black crimped as one plus a white cable- there is also a white cable near the coil not connected?

    Andrew the car is a 1994 Classic SE the wires are as above.Correct the white to the + ve is live

    Car runs fine with tacho and ignition warning light going off.

     

     

     

     

  3. Faffing around under the bonnet I disturbed the ignition coil connections.

    Can someone help and confirm the coil connections for the +ve and -ve terminals and respective colours and number of cables

    I have tried looking at the wiring diagram but my eyes must be past it.

    Maybe someone could photograph there coil connections.

    I did managed to get the car started ( after playing around with the cables), the tacho works and the ignition warning light goes out- just concerned I may be cross wired on the coil - ie the two white and black ignition feeds are connected to the neg terminal?????should this not be +ve.

    Current coil  connections I have +ve 3 white cables ,-ve 2 white and black and 1 white if that helps

    Also how does one gain access to the Distributor-I can hardly see it under the cards yet access to check out.

    Do the Carbs have to come off or can it be accessed from underneath 

    Thanks

    Gordon

     

  4. Very interesting and I too am in a muddle- I assume given the date of 1st Registration your car was subject to IVA/SVA which would have included basis emission testing the limits of which would appear on your V5C?

  5. Looking for an alloyed bodied(unpainted) 7 with flared wings. Engine type not that important but would prefer one which is "Smoke Test Only" for MOT purposes.

    No offence to any members but I do not want one on a Q plate.

    I do not mind one requiring mechanical works but body must be ding and dent free.

     

  6. Does anyone have a Oxsted leather seat booster set for sale for a standard S3 Leather seats.

    Who knows someone may have bought a set, tried them and did not get on with them - or upgraded  their seats

                                                     Seat-Booster-Set.jpg.4b1962f8981395f47dd1c990ea07ca94.jpg

    Thanks

  7.  

    For sale is my Mini Cooper Convertible Colour Red.

    Very Low mileage at under 10000 miles and fully maintained by Authorised Mini Dealership.

    This very high specification car is fitted with:

    Leather Heated Seats

    John Cooper Works Chili Pack

    Revering Camera

    Hard wired for Next Base Dash Cam

    Fitted with Mini Garmin Sat Navigation Mount

    Auto Air Conditioning

    Mini Driving Modes

    Tyre Pressure Monitoring

    Cruise Control

    Mini Excitement Lighting

    17" Black Alloys

    The car also comes with the Mini TLC and MOT Protection pack valid until April 2021 which is TRANSFERABLE to the new owner

    LOW ROAD TAX AT £30

    (The actual REMOVABLE Dash Cam Camera and Garmin Sat Nav Unit are Negotiable)-Hard wire and mount remain in situ.

    The car has been serviced in March and is MOT until April 2021

    Asking price £9000

    Consider p/x for XFlow, unpainted  S3 with clamshells with cash adjustment

×
×
  • Create New...