Andrew Willcox Posted March 22, 2023 Share Posted March 22, 2023 Just fitted a new RH driveshaft which has a reluctor ring fitted - old one didn't.Problem is the reluctor ring fouls the mount for the rear ARB.Any tips on how to remove the reluctor ring or other work around? Link to comment Share on other sites More sharing options...
Jonathan Kay Posted March 22, 2023 Share Posted March 22, 2023 There are some discussions in the archives: I'll look tonight.Have you found the Speedometer Guide?Jonathan Link to comment Share on other sites More sharing options...
Andrew Willcox Posted March 22, 2023 Author Share Posted March 22, 2023 Problem solved! Drive shaft out and ring comes off with a few hammer taps. No heat or grinder required!Not vet offer things work out easier than expected! Link to comment Share on other sites More sharing options...
Andrew Willcox Posted March 22, 2023 Author Share Posted March 22, 2023 Problem solved! Drive shaft out and ring comes off with a few hammer taps. No heat or grinder required!Not vet offer things work out easier than expected! Link to comment Share on other sites More sharing options...
Jonathan Kay Posted March 22, 2023 Share Posted March 22, 2023 Discussed in two threads: https://www.caterhamlotus7.club/forum/techtalk/loose-reluctor-ringsafe-drive https://www.caterhamlotus7.club/forum/wanted/reluctor-ring-toothed-ring-drive-shaftJonathan Link to comment Share on other sites More sharing options...
John Vine Posted March 22, 2023 Share Posted March 22, 2023 #3 Have you any plans for the reluctor ring? If not, I'll happily take it off your hands (for a donation to PCR).ETA: Assuming you didn't damage it during removal, of course.JV Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now