jepo Posted March 8, 2022 Share Posted March 8, 2022 I'm going to remove my Sigma engine/gearbox. The engine doesn't have the detachable lifting bracket fitted to connect the crane hook.Does anyone know where to get hold of one, or the part number?Or is it not worth it and better to just use straps around the engine?Thanks Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted March 8, 2022 Member Share Posted March 8, 2022 Some hints and precautions when removing.Jonathan Link to comment Share on other sites More sharing options...
ScottR400D Posted March 8, 2022 Share Posted March 8, 2022 The lifting eye makes things a lot easier. The thread JK referred to was started by me and we borrowed one. IIRC you get one with a kit but not if you buy the car already built. Link to comment Share on other sites More sharing options...
Guy Lowe Posted March 8, 2022 Share Posted March 8, 2022 Are they the same as the Zetec?EDIT: Just re read the OP again, as there is only one on the Sigma they can't be the same . . . . . SORRY Link to comment Share on other sites More sharing options...
ScottR400D Posted March 8, 2022 Share Posted March 8, 2022 I think they're different. Link to comment Share on other sites More sharing options...
SteWi Posted March 8, 2022 Share Posted March 8, 2022 You look like you could be local to me and I've still got mine that you could borrow.Steve Link to comment Share on other sites More sharing options...
Stuntmonkey Posted March 8, 2022 Share Posted March 8, 2022 Here it is.There are two numbers stamped on it 96MF-17A084-AG and C83FAAlternatively PM me your address and I'll post it over to you - so long as you post it back when done. Link to comment Share on other sites More sharing options...
Wrightpayne Posted March 8, 2022 Share Posted March 8, 2022 Few on ebay!! Link to comment Share on other sites More sharing options...
jepo Posted March 8, 2022 Author Share Posted March 8, 2022 Thanks all. I was able to buy one on eBay using the part number from stuntmonkey. Hopefully here in time to make a start at the weekend! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now