CharlesElliott Posted February 24, 2018 Share Posted February 24, 2018 Have fitted them both ways over the years, waisted / thinner end at the back (which means you can't see it so easily) or at the front (more clearance to chassis rail). Which way are they fitted from the factory, is the thinned section towards the front or rear? Link to comment Share on other sites More sharing options...
TomB Posted February 24, 2018 Share Posted February 24, 2018 Mine is thin end at the rear. As far as I know / recall, it always been that way around. Link to comment Share on other sites More sharing options...
SM25T Posted February 24, 2018 Share Posted February 24, 2018 Panel under fuel tank ?? Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted February 24, 2018 Leadership Team Share Posted February 24, 2018 Honeycomb panel Ian.+1 for the thin edge to the rear.Stu. Link to comment Share on other sites More sharing options...
SM25T Posted February 24, 2018 Share Posted February 24, 2018 Not on mine. Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted February 24, 2018 Area Representative Share Posted February 24, 2018 It's race cars that have the panel under the tank. Link to comment Share on other sites More sharing options...
CharlesElliott Posted February 24, 2018 Author Share Posted February 24, 2018 Ok, may only be on race cars but I’ve only owned race cars!+2 for thin section to the rear so far. Link to comment Share on other sites More sharing options...
Ian Mackenzie Posted February 25, 2018 Share Posted February 25, 2018 Thin part to the rear for me too!CheersIan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now