Jump to content
Click here if you are having website access problems ×

A Few bits for Sale REVISED PRICING


MereCat

Recommended Posts

*wavey* Items for Sale – Some pics aswell *smile*

either I have got some of these prices wrong or your all saving your pennies for the Easter eggs *confused*

 

Revised pricing for some items and updates below...Happy dibbing :waves

 

UPDATE

 

Tyres

 

3 x CR500 175/55/13 tyres NEW – Date on them are 2 x 2910 and 1 x 1111

1 x CR500 175/55/13 tyre with 4.7mm tread. Date is 2110

 

(These have been sat off the floor in my cellar and covered so are fine).

Selling as a set £300 + P&P OR Collection NOW £200 + P&P OR Collection

 

SOLD to Rob subject to payment.

 

Wheels and Tyres

 

5 x MX-1460 two gates wheels 6Jx14 Silver wheels with Michelin Pilot rubber ranging from 3mm to 6mm. These include x 4 Caterham centre caps (yellow) as supplied on original car. ideal for the classic look or a set of track wheels.. *cool*

 

£195 + P&P OR Collection NOW £150 + P&P OR Collection still available *wavey*

 

8 Spoke Wheel (s)

 

1 x 8 spoke wheel 6 x 13 Black (some rashing and a chip to powdercoat) would suit a spare track wheel or a refurb (anyone need a wheel and change the colour?)

 

£60 + P&P OR Collection SOLD TO ROGER

 

1 x 8 spoke wheel 6 x 13 Black good condition

 

£80 + P&P or Collection SOLD TO ROGER

 

CARBON Cycle wings

 

2 Original Caterham Carbon Fibre Cycle wings with side indicators (Orange can be changed for white) NON Lacquered. Very good condition.

 

These have been pre drilled and should fit 15” wingstays or 13” (if you use the front two bolts and bond the rears, keeping the bolts in for appearance).

 

Selling £260 + P&P NOW £220+ P&P Still available *wavey*

 

Tonneau

 

As new Tonneau with Tillet pockets, poppers fitted (S3)

£100 + P&P Mark YHM re question.

 

Half Doors

Caterham - these are standard doors but some light damage to one of the sides where material covers (looks like glue become bubbled). Could possibly be fixed? Poppers not fitted.

 

£40 + P&P SOLD TO JON subject to payment

 

 

Boot coverto fit S3 with hoodsticks (Good condition) Poppers fitted

 

£45 + P&P Still available *wavey*

 

4:1 sports exhaustwith four separate pipes, which go to the collector outside the car. body (i.e. NO Cat). This is off a tuned 1.6 SS K series car. I am told Caterham have made some 15 types of exhaust so not too sure which this is but it’s a sports type.

No idea of how long it had been on, but the car had done 10K miles when I took it off. Started to clean up the pipes but shall leave that for the new owner…(I don’t have enough Autosol or time. Pic shown fitted to my car.

 

£200 + P&P SOLD to Rob subject to payment

 

Side Mirrors (These will jog a few memories for some 🥰) Came attached to my Aeroscreen.

 

£ Make me an offer as I have no idea what these are worth? *confused* THIS TYPE can be seen fitted one R300 euro car for sale on PH at the moment.

 

Chrome 7” Headlights Very good condition (slight mark on inside of offside light that should come out with a polish).

 

£75 + P&P WITHDRAWN as now keeping *cool*

 

Linky thing...here

 

Cheers

Paul

 

Dates updated (Thanks Ian I thought it was one or other)...

 

 

Edited by - MereCat on 26 Mar 2013 17:40:47

 

Edited by - MereCat on 29 Mar 2013 08:51:01

 

Edited by - MereCat on 29 Mar 2013 09:00:53

 

Edited by - MereCat on 29 Mar 2013 09:01:28

 

Edited by - MereCat on 31 Mar 2013 10:54:26

Link to comment
Share on other sites

  • Area Representative

Hi Rullingen *wavey*

 

There is a link to photos in the original post, and the exhaust looks to me to be a long branch race exhaust just like mine *cool*

 

My car is a 2005 Roadsport and as such had the single side pipe with the CAT in the exhaust before I changed it.

 

You will still need a CAT for the MOT, however, I had my original exhaust modified to fit the new primaries and collector by a local specialist exhaust fabricator, it cost me about £100.

 

All the best

 

Richard

Link to comment
Share on other sites

Sounds like a plan! *smile*

 

I suppose it depends upon the pipe diameter of the output of the collector. Any chance I could request this please? I'll go and measure my system.

 

Am I right in saying that the silencer is included in the sale? If so, could you split? or maybe there's someone else who wants it.

Link to comment
Share on other sites

  • Area Representative

Hi again Rullingen,

 

The size of the output pipe on the collector isn't really a problem as on my old system the existing single pipe was cut at the start of the cone onto the CAT.

 

Then a new pipe was welded in to suit the collector.

 

All the best

 

Richard

 

Edited by - skeetsy on 29 Mar 2013 23:25:16

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...