Jump to content
Click here if you are having website access problems ×

Indicator Warning Sound


Warren S Smith

Recommended Posts

I cannot remember whose website it is (or the wiring) , but I fitted this to mine, and it works very well. All I remember is that you need two beeper units, one for the left and one for the right, then it is very simple to wire. It can be done with a single unit but the wiring is more complex.

 

This is something that Caterham should have made an option years ago.

Link to comment
Share on other sites

I'm sure I did it real simple:

 

go to Maplin- buy small beeper for about a quid.

 

Wire to central terminal of switch.

 

Other wire to convenient earth.

 

When switch is moved either way, beeper sounds - loudly as it is taped to rear of dash which seems to act as a sound board.

 

Simple, cheap and no more forgetting it!

 

Bri

Link to comment
Share on other sites

Installed one in exactly the same way as previous post except obtained mine from a shop that dealt in home security, tiny unit cost a quid or so. Wired it into the back of the switch so it worked either way. It was so loud I had to wrap it in electricians tape to quieten it down, but even then it remained so, and I wear ear plugs in the car !! Unit still in place but disconnected.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...