Jump to content
Click here if you are having website access problems ×

Noise at 3500


hickton

Recommended Posts

I get a noise, like a metallic chatter, when I get too 3500 in all gears ( not sure about 1st as I tend to get into second before I get that high). There is no noise if I rev out of gear. Checked that there is oil in the gearbox and checked all round for loose panels ect. Anyone had a similar problem?
Link to comment
Share on other sites

I had someting similar, drove me nuts! *mad*

It proved to be a noise from the exhaust, the primaries on mine are just a push fit into the cat/collector & they rattled at certain revs. Cured by tapping up some thin strips of stainless into the tiny gap to make them a snug fit *thumbup*

 

 

Link to comment
Share on other sites

Not sure what RPM it happens at but I get a resonance from the wiper drive mechanism, I have shoved a bit of foam up under the dash between the drive and bulkhead (in center of dash) which has reduced it somewhat.

 

Ivan

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...