Token Jock

Check with Jon Vickers at Millwood. When i p/x my K-series Superlight in for an R500 i also gave him a K-series sump. John

Just wanted to post up my appreciation of John Vine's help and for taking the time back in April 2010 to provide his excellent write up regarding the Flexi-coil loom upgrade to Duratecs http://www.lotus7.club/forum/techtalk/r400-duratec-misfire-update-now-flexicoil-loom-fitted?page=1 This post helped me to understand that I had the older style loom on my R500 and what was required to make the coil loom upgrade to solve my misfire. Thanks John

Nick Potter in Lubenham nr Market Harborough is an excellent option and not far from Caterham Midlands. Nick certainly knows his way round a 7 having been at Caterham Midlands for many years. John

It is the Camcoat reviews that just make me say No. I went back to Zircotec with a polite "How much? As I found the following http://zircotec.com/newsitem/3/47 The reply for the Primary range coating on the primaries to the inside of the side skin was including collection / delivery was £316 + VAT. Still a chunk of cash but perhaps a better option?

No direct experience on a Caterham however do have a friend with an Ultima and he had his manifolds Zircotec Ceramic sprayed and has found a significant change in his inlet air temps and now can touch the manifold 10mins after switching off which wasn't the case before. Just the other day I enquired regarding the cost for Zircotec on my R500 primaries, roughly 50cm pipe length and 16.5cm circumference. Today i got the quote £464 + Shipping + VAT for one of their Performance colours, so a whopping total of £586.80

I have Savage switchgear on my R500D however my indicator switches/buttons are on the steering wheel and not the dash. Wasn't aware that R500's with Savage switchgear had indicator buttons on the dash

About 1645hrs today Thanks for the headlight flash John

that would be me Whatever may have happened to your bonnet hope you get it sorted John

Managed to get it sorted [smile] So if anybody else has the same problem here was what I did. Row of 3 pins are 1,2 3 and Row of 2 pins are A & B Pin 1 was +12v feed when ignition on (green wire for me) Pin A was Earth (black wire) Pin 2 was the master cylinder reservoir switch (Black wire with white stripe) and (White wire with black stripe) Pin B was the looped out (White wire with black stripe) from Pin 2 Pin 3 remains unconnected. I found this image of the switch terminals which was certainly of help. Hope it helps others John

Great thanks JK The whole diagram would be really helpful, i'll send you a PM, i'd be very grateful if you could email me the diagram. Thanks John

Hopefully somebody can help me out My brake test switch on my R500 (aluminium Savage push button switch was a bit sticky and in the process of fixing it I stupidly removed the wires without noting which terminals they were connected to There are 5 terminals at the back of the switch, a row of 3 and a row of 2. I have a black wire, a green wire, a white & black stripe which loops into a black & white stripe wire Are there any fellow Blatchatters that would be kind enough to stick their head under their dash and to check how their brake test switch is wired? Thanks John

Sorry Stu for the duff info. Nige thanks for correcting me must've been the jet lag having just got back from holiday in the last day or so. If you go Stu, hope you enjoy the show

Hi Stu, Spoken to the boss and I am told. 14th June Wellesbourne has a Wings & Wheels event where the resident Vulcan XM655 will do its high speed taxi run so that could work for your family bash at Charlecote. 28th June there is flyover as part of the V force tour. http://www.vulcantothesky.org/news/671/82/Locations-for-V-Force-Tour.html Hope this helps John

Hello Stu, thanks for the wave Was just finishing a blat with the chap that bought my old Superlight a few months back and when you saw me at the McDonalds roundabout and I was virtually at home. I hear from my wife that traffic was bad for Throckmorton, you get stuck? My wife went over to her flying club at Wellesbourne to see the Vulcan fly over. John

Thanks Mic. Eventually i worked it out that it was -12 so good to get your confirmation as well Cheers John